Yamaha NS-E80 Bedienungshandbuch PDF herunterladen

NS-E80

Natural Sound Bass-Reflex

Type Effect Speaker System

Thank you for selecting this Yamaha NS-E80 speaker

system.

This model is designed mainly to be used as an effect

speaker system.

PRECAUTIONS

Read these precautions carefully before operating

your speakers.

• When using an amplifier with a rated output power

higher than the music input of the speakers, care

should be taken never to exceed the speakers’

music input.

• Do not attempt to clean the speakers with chemical

solvents as this might damage the finish. To clean,

wipe with a dry, soft cloth.

• To prevent the enclosure from warping or

discoloring, do not place the speakers where they

will be exposed to direct sunlight or excessive

humidity.

• Do not place the speakers where they are liable to

be knocked over or struck by falling objects. Stable

placement will also ensure better sound

performance.

• Placing the speakers on the same shelf or rack as

the turntable can result in feedback.

• As these speakers contain strong magnets, avoid

placing watches, magnetic tapes, etc. near them.

Also, placing the speakers near a TV set may

impair picture color. If this happens, move the TV

set away from the speakers.

• Secure installing is the owner’s responsibility.

YAMAHA shall not be liable to any accident caused

by a failure in installing at a proper position and by

proper installation procedure.

CONNECTION TO

YOUR AMPLIFIER

BEFORE MAKING CONNECTIONS, MAKE SURE

THAT THE AMPLIFIER IS SWITCHED OFF.

m CONNECTIONS

• Connect the push-type input terminals at the rear of

the speakers to the speaker output terminals of your

amplifier with the supplied speaker cables.

• One side of the speaker cable is marked by a white

line. Connect the (+) terminals on both the amplifier

and the speakers using this white-marked side.

Connect the (–) terminals on both components

using the unmarked side of the cable.

• Connect the left speaker to the left (marked L)

terminals of your amplifier, and the right speaker to

the right (marked R) terminals, making sure not to

reverse the polarity (+, –). If one speaker is

connected with reversed polarity, the sound will be

unnatural and lack bass.

Procedures:

1 Press the tab on the terminal down, as shown in

the figure.

2 Insert the bare wire end properly into the terminal.

3 Remove your finger from the tab to allow it to lock

snugly on the cable’s wire end.

4 Test the security of the connection by tugging

lightly on the cable at the terminal.

Press tab

White line

Speaker output

terminals of the

amplifier

White line White line

Right speaker Left speaker

1 2

Inhaltsverzeichnis

Seite 1 - YOUR AMPLIFIER

NS-E80Natural Sound Bass-ReflexType Effect Speaker SystemThank you for selecting this Yamaha NS-E80 speakersystem.This model is designed mainly to be

Seite 2 - SPECIFICATIONS

SETTING UP THE SPEAKERSm Attaching the speakers to a wallThe speakers may be attached to a wall by usingthe hooks provided on the speakers’ back panel

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha NS-E80 Bedienungshandbuch

Stöbern Sie online oder laden Sie Bedienungshandbuch nach Lautsprecher Yamaha NS-E80 herunter. Yamaha NS-E80 Owner's manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Lautsprecher Yamaha NS-E80