Yamaha DG60-112 Bedienungshandbuch

Owner’s Manual

10ConnectionsBefore making any connections to any of the DG60FX-112’s INPUT and/or OUTPUT jacks,make sure that the power on the DG60FX-112 and all oth

11 Connecting HeadphonesConnect a pair of headphones to the PHONES jack(standard stereo) on the DG60FX-112 to play orpractice in private.The volume o

12Using the DG60FX-112First, connect a guitar to the DG60FX-112 and try some sounds. Produce Sound1. Before connecting, turn off the power on theDG60

13 Try Changing the SettingsUse the knobs or buttons on the panel to create your own original tone.Using the DG60FX-112• Continue rotating the knob i

14Using the DG60FX-112When another patch is selected, any set-tings you have altered will revert to theiroriginal settings.If you want to save those s

15 Try Selecting Another PatchThe DG60FX-112 holds a total of 180 patch pro-grams (patch) in its internal memory.The 180 patches are divided into two

16● Using the Foot Switch and the BankSwitch• Press a foot switch (1-3) to select the corre-sponding patch number 1-3 in the currently se-lected group

17Using the DG60FX-112 Create and Store a PatchOriginal settings can be stored in the USER AREA(011-933). Try creating an original patch and thenstor

18Using the DG60FX-112●Using the DG60FX-112 Without PatchesThe [MANUAL] button lets you control the DG60FX-112 when patches are not used.Press the [MA

19Compressor● Comp (Compressor)Controlling the input signal (peak) this effect keepsthe maximum level constrained to the level set withthe knob.• COMP

2ADVARSEL!Lithiumbatteri—Eksplosionsfare vedfejlagtig håndtering. Udskiftning måkun ske med batteri af sammefabrikat og type. Levér det brugtebatteri

20Effect Functions and Parameters• SPEED knob + [TREMOLO]Sets the phase difference between the left andright sounds. From 0 degrees to 360 degrees(0.0

21External Control Settings• trE : Tone Control (TREBLE)• nnd : Tone Control (MIDDLE)• bAS : Tone Control (BASS)• PrE : Tone Control (PRESENCE)• CP :

22Tuner ModeWhen the pitch is low, the CHORUS andFLANGER lamps will light. When the pitch is high,the ROTARY and TREMOLO lamps will light.Tune the not

23Utility ModeThe Utility Mode is used for settings that cover the overall system of the DG60FX-112 such asthe foot switch, MIDI, external control, EX

24 MIDI FunctionsPress the [UTILITY] button and set the Amp Selectswitch to LEAD2 (“mmd” will appear).● Create a MIDI Program Change Receive TableSet

25To send all USER AREA data (011-933) plusUtility settings with the Bulk Out operation.Press the [TAPE ECHO] button (“ALL” will appearon the display)

26Utility Mode● Set the Parameter’s Maximum ValuePress the [TREMOLO] button and use the [UP]/[DOWN] buttons to set the parameter’s maximumvalue (the p

27 Wah Pedal SettingsThese settings are available when the Wah Pedalfunction (“UUH”) is selected as the controller in theExternal Control settings.Pr

28Error MessagesIf an error occurs during operation, one of the following error message numbers will appearon the display.E1: MIDI Receive Buffer Full

29SpecificationsDigital Section• Full Digital Signal Processing• 8 Channel Preamp• Digital Effects• Compressor• Chorus, Flanger, Phaser, Rotary Speake

3WARNING- When using any electrical or electronic prod-uct, basic precautions should always be followed. These precau-tions include, but are not limit

30MIDI Implementation Chart YAMAHA [ Guitar Amplifier] Date:30-Jun-2000 Model DG60FX-112 MIDI Implementation Cha

31MIDI Implementation Chart: : : : :: : :

Printed in TaiwanV611000

4Thank you for purchasing the YAMAHA DG60FX-112Guitar Amplifier.To fully understand the functions and to obtain maxi-mum life of this device, please r

5About the Backup BatteryA backup battery (lithium battery) is used to keep internal data (settings) from being lost, even whenthe power cord is unplu

6Nomenclature Control Panelq Input Jacks (INPUT HIGH, LOW)These are the input jacks for the DG60FX-112. Con-nect the guitar here. Use the jack labele

7Nomenclature!2 Manual Button (MANUAL)Independent of the selected patch’s settings, thisbutton changes the sound to the settings of theknob’s current

8Nomenclature Rear Panel@6 Power Switch (POWER)Power switch for the main unit.* To protect the speakers, set the OUTPUT knob u to “0”before switching

9Nomenclature#4#6#5#7● Top Panel ● Rear Panel#4 Foot Switches 1, 2, 3According to the settings in the Utility Mode (→ page23), the switches can be use