YAMAHAYPDRPROFESSIONAL DISC RECORDER YPDR601/RC601Operating ManualIMPORTANT!Please make a note of the serial number of this unit in the space Indicate
To lock and unlock the head, use the slider on the bottom of the main unit (see the illustration below):2 • Installation and precautio
2 • Installation and precautions - Copyrightnot use thinners, alcohol or solvent to clean discs. Allow the discs to dry naturally, or use
3 • Main unit (YPDR601) - Front panel3 • Main unit (YPDR601)The main unit houses the disc transport, recording and replay components, and
3 • Main unit (YPDR601) - Rear panel(7) ERROR indicatorIf a non-recoverable error occurs, this indicator will light. Press the Tr INC an
3 • Main unit (YPDR601) - Rear panelAll XLR-type (analog and digital) connectors on the YPDR are wired as follows:Pin 1 Shield (ground)Pin 2 Hot (+)Pi
3 • Main unit (YPDR601) - Rear panelrecorders together. See the section on "Multi-recorder connection" on page 19 for details.REMO
4 • Remote controller (RC601) - Front panel4 • Remote controller (RC601)4.1 Front panel(H) ®©DIGITAL IN/EMPHASIS/COPY PROHIBIT/ALARM indicatorsThes
4 • Remote controller (RC601) - Front paneliii) If the copy protect flag is not set on the source, and the rear panel COPY GUARD swit
4 • Remote controller (RC601) - Front panelas this indicates digital clipping. A PEAK HOLD function for these meters is available through
4 • Remote controller (RC601) - Rear panel4.2 Rear panel(T) PHONES connectorA stereo 1/4" connector for headphone monitoring of the sig
ACAUTIONARISK OF ELECTRIC SHOCK DO NOT OPEN—CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INS
4 • Remote controller (RC601) - Rear panel(5) INPUT SELECT switchesThese determine the type of source. The first switch allows selects eith
5 • Connection - Audio connections5 • ConnectionNOTE: Make all control and audio connections before connecting power to either the main
5 • Connection - Single-recorder connection• Set the DRIVE ID switch on the main unit to "0".• Connect the CONTROL connector of the
5 • Connection - Multi-recorder connection5.3 Multi-recorder connectionThis configuration allows the simultaneous recording of multiple discs
5 • Connection - Multi-recorder connectionThe DRIVE SELECT switch on the rear of the controller should be set to the number of recor
6 • Operation - Playback of previously-recorded CDs6 • OperationThere are several basic methods of using the YPDR described here. Many o
6 • Operation - Recording fixed tracks (TOC PRE mode)Use the PLAY key to start replaying the disc. The PAUSE key, as well as the STOP k
6.2.1 Recording the TOCSet the TOC PRE/AFTER switch on the rear panel of the controller to "PRE", and the 10/30 switch beside
tor ("PLAY1" and "PLAY2" messages will also be sent from the PARALLEL I/O connector. See the "Parallel I/O t
ment) key can be used to write index markers after the index number in the display has changed to "01".REC MUTEThe REC MUT
MAINS SUPPLY CORD SET AND SELECTOR SWITCHIMPORTANT: The Yamaha Professional Disc Recorder YPDR601 is equipped with a Mains select switch (100-120 or 2
When a blank disc is inserted, the display will show "OOOObd". If a disc already containing audio data but no TOC data
6 • Operation - Multi-recorder recordingREC MUTEThe REC MUTE key can be used to mute the source signal. However, the source signal can
6 • Operation - DuplicationRecording may be carried out only in the TOC AFTER mode. Operation is the same as for single-unit operation.If
6 • Operation - Duplicationindicator will come on. Unit N will enter PLAY/PAUSE mode, and the other units will go into REC/PAUSE mode.Press PLAY and R
7 • Errors7 • ErrorsIt is possible that an internal error will occur while the YPDR is being operated. This will cause the ERROR i
8 • Technical specifications - Controller (RC601)8 • Technical specifications8.1 Controller (RC601)Operating temperature 0°C to 40“C (32°F to 104°F)
8 • Technical specifications - Recorder Unit (YPDR601)8.2 Recorder Unit (YPDR601)Recording formatCD-DARecording mediumYamaha specified discMaximum r
8 • Technical specifications - 50-pin I/O connector pinout8.3 50-pin I/O connector pinoutSignal name Pin numberSignal nameSHIELD GROUND 126GROUND+DB(
8 • Technical specifications - PARALLEL I/O (D-sub 15-pin)8.5 PARALLEL I/O (D-sub 15-pin)Pin Signal name I/O1PLAY1O2GND-3PLAY2o4GND-5 STOP o6GND-7 RE
8 • Technical specifications - PARALLEL I/O (D-sub 15-pin)8.5.1 Parallel I/O timing chartOUT PUTPLAY 1PLAY 2STOPREMOTEINPUT SIGNALINPUT REC PLAYSTARTT
This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or 87/ 308/EEC.Get appareil est confo
IndexAC power AES/EBU ALARM indicator ANALOG INAnalog input level line-up ANALOG OUT Applications A-TIMEAudio connections AUTO PAUSEBBroadcastingcCl e
IndexSTDBYSYNC2310Terminator TOC AFTER TOC indicator TOC PRE TRACKTrack and index location TRACK display Track start structure Transport controls Trim
YAMAHAYAMAHA CORPORATION10-1 NAKAZi-WA-CHO HAMAMATSU, JAPAN VK4984i;-0 iYinfed in Japan BWWB, bC®
Table of Contents1 • Introduction1.1 Features...
Table of Contents2 PHONES LEVEL...153 DRIVE SELECT...
1 • Introduction - Features1 • IntroductionThe Yamaha Professional Disc Recorder (YPDR) system is composed of two parts: the YPDR601 Disc
1 • Introduction - Applications1.4 ApplicationsThe YPDR system is suitable for all professional audio applications wherespeedy production of a limite
2 • Installation and precautionsThe following should be included with each YPDR system:RC601 Remote Controller...........
Kommentare zu diesen Handbüchern