Yamaha RGX820Z Spezifikationsblatt PDF herunterladen

QC71550 0112

Printed in Taiwan



■ String Action

Adjust the tremolo unit height by rotating the height adjustment bolts q.

■ Intonation Adjustment

If the pitch at the 12th fret is sharp compared to the harmonic tone:

→ Turn the intonation adjusting screw w clockwise.

If the pitch at the 12th fret is flat compared to the harmonic tone:

→ Tune the intonation adjusting screw w counter-clockwise.

■ Arm Tension

Turn the arm tension screw e clockwise to make the arm tighter.

Turn the arm tension screw e counter-clockwise to make the arm looser.

Volume Control

Pickup Selector

Tone Control

Output Jack

Battery Compartment

* No battery needed to use

magnetic pickup only

Volume Control

(for output jack #1)

Pickup Selector

Front Pickup

Rear Pickup

Tone Control

Output Jack #1

* Output only from magnetic pickup

* Bypass pre-amp inside (passive)

Battery Compartment

* Battery needed to use

output jack #2

Pickup Selector

Front Pickup

Rear Pickup

Tone Control

for magnetic pickup

Output Jack #2

* Output from magnetic & piezo pickup

* Output through pre-amp inside (active)

Piezo Pickup

Bridge

Inside Knob:

Volume Control for

output jack #2

Outside Knob

Panpot for magnetic/piezo

* Clockwise for magnetic.

Counter-clockwise for piezo

RGX620Z/620Z-D6 CONTROL SYSTEM

Adjustment of tremolo unit

NOTE 1 Output jack #1 & #2 can be used at one time.

NOTE 2 When not in-use, unplug from output jack #2 to save battery.

Output jack #1 dose not consume battery.

1. To use magnetic pickup only,

plug into output jack #1.

2. To use both magnetic & piezo pickup,

plug into output jack #2.

Front + Rear

Front Pickup

Rear Pickup

Front + Rear

RGX820Z CONTROL SYSTEM

Changing the string on SPERZEL “Trim-Lok” tuner （RGX820Z）

The SPERZEL “Trim-Lok” tuners offer easy string change

and improved tuning stability when using the tremolo bridge.

1) Loosen the knob q on the back of the tuner. As the

locking pin w in the string post goes down, remove the

old string.

2) Place the new string from the bridge into the string hole

e of the string post.

Do not wind the string around the post.

3) Pull the new string tightly and tighten the knob q to lock

the string.

4) Tune the strings to the pitch.

NOTE Don't loose the knob q too much. It may drop out the

tuner.

Tighten

Loosen

 1

Inhaltsverzeichnis

Seite 1 - 

QC71550 0112Printed in Taiwan String ActionAdjust the tremolo unit height by rotating the height adjustment bolts q. Intonation Adjustme

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha RGX820Z Spezifikationsblatt

Stöbern Sie online oder laden Sie Spezifikationsblatt nach Nein Yamaha RGX820Z herunter. Yamaha RGX820Z Specification Sheet Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Yamaha RGX820Z