Yamaha YHT-860 Bedienungsanleitung PDF herunterladen

Quick-Connect Poster

YHT-860

Home Theater in a Box

1 2

Inspect Contents After unpacking, inspect the contents to conﬁ rm you have

the above items:  two surround speakers with tall support stands,  two front

speakers with short support stands,  one center speaker,  subwoofer, 

HTR-5850 A/V Receiver,  speaker wire,  subwoofer RCA cable,  four caps,

 four adaptors  four stand brackets,  two table top bases for tall support

stands,  two speaker stand bases for short support stands,  sixteen non-skid

pads,  four adapter mounting screws,  eighteen base mounting screws, 

twelve stand bracket mounting screws,  sixteen cap mounting screws,  OMNI

mounting screws, Also included, but not shown, are remote control, AM and FM

antennas and related Owner’s Manuals.

Connect Center Speaker Wire as shown. The positive (+) side of

the wire with the white stripe attaches to the red terminal. The negative

(-) side attaches to the black terminal. Place all speakers in desired

location as shown in Step 2, Room Layout.

Your System Room

Layout

Speaker Placement After connection of the speakers place them so

they appear in the approximate positions as shown in the diagram above.





Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect

Poster will help you get started. Follow the steps to connect the speakers ﬁ rst. Then connect your DVD Player

and other components. Refer to your Owner’s Manuals as well as those that came with your other components

for complete instructions and precautions. Be sure that all components are not plugged in while making

connections. You will need the following which are not included in the package: Phillips screwdriver, wire

cutter/stripper, optional for wall mounting: brackets, toggle bolts, molly anchor screws or sheet metal screws.





Connect Center

Speaker Wire

4 6

Speaker Stand Assembly

Connect Stand Bracket to Base Align the arrow on the stand

bracket to Yamaha logo on base. Use Stand bracket mounting screws (2)

to the base. Repeat steps for each bracket and base assembly.

Attach non-skid pads to the bottom of the base as shown. Repeat

steps for each base.

Non-skid pads

Base

Stand bracket

mounting screws

Stand bracket

Attach Support to Base Use base mounting screws (4) to attach the

support to the base as shown. Do not over-tighten the screws. Doing so

may damage the screws or assembly. Repeat steps for each base.

Base

Base mounting screws

Support

Cut and Strip Speaker Wire to appropriate lengths. For both the short

supports (2) and tall supports (2) pass the speaker wire through the supports

from under the side of the base. Repeat steps for each support and base.

Speaker wire

Base

Support

Pass the Speaker Wire through the holes in the under side of the

cap. Attach the cap to the support with the cap mounting screws (4).

Support

Speaker wire

Cap

mounting

screws

Pass the Speaker Wire through the hole in the adaptor. Then push

the speaker wire ﬁ rmly into the groove and pull as shown. Be sure to

align screw holes of the adaptor and support as shown. Repeat steps for

each support.

Cap

Support

Push the Speaker and the

adaptor into the cap. Attach

the adaptor to the support with

the adaptor mounting screw (1).

Repeat steps for each speaker.

Receiver must not

be plugged in while connecting

speakers.

Pass the Speaker Wire through the groove in the speaker. Attach

the adaptor to the speaker bottom (for front speakers use short support

stands and for surround speakers use tall support stands) with adaptor

mounting screw. Connect the speaker wire to the speaker terminals.

Positive (+) side of the wire with white stripe attaches to (+) terminal.

Negative (-) side attaches to (-) terminal. Repeat steps for each speaker.

Adaptor

Speaker wire

Support

Adaptor

Stand bracket

mounting

screw

Speaker

Adaptor

mounting

screw

Speaker

Carefully Place the Speaker

Stand on its Side Pull the speaker

cable gently from the speaker base to

remove any slack. Grasp the speaker

cables with one hand close to the

speaker terminals to prevent any

damage to the terminals while doing

this. Repeat steps for each speaker.





 



























CAUTION

Speaker Connections

Connect Front Speakers and Surround Speakers Positive (+)

side of the wire with white stripe attaches to (+) terminal. Negative (-)

side attaches to (-) terminal.

CAUTION Receiver must not be plugged in while connecting speakers.

HTR-5850 Receiver







Mounting the Center Speaker (optional) Place the center speaker

on top of the TV or inside the TV rack so that it is stable. When placing the

speaker on top of the TV, put the provided Velcro™ strips on the bottom of

the speaker and the top of the TV to prevent the speaker from falling.















Align

1 2

Inhaltsverzeichnis

Seite 1 - Quick-Connect Poster

Quick-Connect PosterYHT-860Home Theater in a Box1 213Inspect Contents After unpacking, inspect the contents to conﬁ rm you have the above items:  tw

Seite 2 - AUDIO/VIDEO OUT

15VCR 11Enjoy the Yamaha Home Theater Experience Be sure to put batteries in your remotes (see Owner’s Manuals for instructions).Refer to your Owner’s

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha YHT-860 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Nein Yamaha YHT-860 herunter. Yamaha YHT-860 User manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Yamaha YHT-860