Yamaha RX-A1010 Bedienungshandbuch

En 1AV ReceiverOwner’s Manual Be sure to read “Safety Brochure” (supplied booklet) before using this unit. English for Canada, Europe, Asia, Africa, O

En 10Front display (indicators)1 HDMILights up during normal HDMI communication.INLights up when HDMI signals are being input.OUT1/OUT2Indicate the HD

En 100❑ CenterSelects whether or not a center speaker is connected and its size.Settings❑ SurroundSelects whether or not surround speakers are connect

En 101❑ Bass Cross OverSets the lower limit of low-frequency component produced from speakers of which the size is set to “Small”. A frequency sound l

En 1024Use the cursor keys to adjust parameters and press ENTER.Setting rangeGain: -20.0dB ~ +6.0dB (0.5dB steps)Center frequency: 31.3Hz ~ 16.0kHzQ f

En 103 Dynamic RangeSelects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.Settings Max VolumeSets

En 104 ProcessingEnables/disables the video signal processing (resolution and aspect ratio).Settings• 720p-, 1080i- and 1080p-resolution video signal

En 105❑ ARCEnables/disables ARC (p.25) when “HDMI Control” is set to “On”.Settings• You do not need to change this setting normally. In case noises ar

En 106NetworkConfigures the network settings. IP AddressConfigures the network parameters (IP address, etc).❑ DHCPSelect whether to use a DHCP server

En 107Multi ZoneConfigures the multi zone settings. Zone2 SetConfigures the audio output settings for Zone2.❑ VolumeEnables/disables volume adjustmen

En 1083Press ENTER, use the cursor keys to rename, and then press ENTER again.4Use the cursor keys to select “OK” and press ENTER.• To clear the entry

En 109 Input AssignmentAssigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. Setup procedureExample: assigning the OPTICAL

En 11Rear panel1 PHONO jacksFor connecting a turntable (p.33).2 DOCK jackFor connecting an optional Yamaha products such as iPod dock (p.62), iPod wir

En 110 Trigger Output1, Trigger Output2Sets the TRIGGER OUT 1~2 jacks to function synchronized with power status of each zone or input switching.❑ Tr

En 111LanguageSelect an on-screen menu language.Settings• The information on the front display is provided in English only.You can view information ab

En 112Types of information Audio SignalDisplays information about the current audio signal.• Even when this unit is set to output bitstream signals d

En 113You can configure the system settings of this unit using the front display.1Set this unit to standby mode.2While holding down STRAIGHT on the fo

En 114Turning on/off the remote control sensor (REMOTE SENSOR)Turn on/off the remote control sensor on the main unit. While the remote control sensor

En 115Removing the limitation on HDMI video output (MONITOR CHECK)This unit automatically detects resolutions supported by a TV connected to the HDMI

En 116Updating the firmware (FIRM UPDATE)New firmware will be released irregularly for the purpose of additional features or product improvements. It

En 117SCENERETURNVOLUMESUR. DECODESTRAIGHTENHANCERSLEEP PURE DIRECTAVAUDIO123674V-AUX5FMINFOMEMORYAMPRESETPA RT YMOVIE MUSIC1 234TVCDRADIOMUTEENTER785

En 118Setting the remote control codes for playback devicesBy setting the remote control codes for your playback devices, you can operate those device

En 119Programming from other remote controls (learning)(China, Korea, U.K. and Europe models only)The remote control of this unit can receive remote c

En 12Remote control1 Remote control signal transmitterTransmits infrared signals.2 MAIN/ZONE2Switches the zones (main or Zone2) to operate with the re

En 120Resetting remote control codes Resetting all remote control codesYou can clear all remote control codes (including functions learned from other

En 121If this unit is connected to the Internet, the corresponding message will be displayed on the TV when a newer firmware is available. In this cas

En 122APPENDIXThe new speaker system does not provide an ideal sound balance...If you have changed speakers or speaker system, use “Auto Setup” to opt

En 123Refer to the table below when this unit does not function properly.If the problem you are experiencing is not listed below, or if the instructio

En 124AudioProblem Cause RemedyNo sound.Another input source is selected. Select an appropriate input source with the input selection keysSignals that

En 125VideoOnly the front speakers work on multi-channel audio.The playback device is set to output 2-channel audio (PCM, etc.) only.Change the digita

En 126FM/AM radioUSB and networkProblem Cause RemedyFM radio reception is weak or noisy.There is multi-path interference. Adjust the FM antenna height

En 127Remote controlThe files in the PC cannot be viewed or played back.The files are not supported by this unit or the media server.Use the file form

En 128Error indications on the front displayMessage(alphabetical order)Cause RemedyAccess deniedAccess to the PC is denied. Configure the sharing sett

En 129Audio informationAudio and video synchronization (Lipsync)Lip sync, an abbreviation for lip synchronization, is a technical term that involves b

En 13SETUPNow all the preparations are complete. Enjoy playing movies, music, radio, etc. with this unit!General setup procedure1 Connecting speakers

En 130DTS Digital SurroundDTS Digital Surround was developed to replace the analog soundtracks of movies with a 5.1-channel digital sound track, and i

En 131Video informationComponent video signalWith the component video signal system, the video signal is separated into the Y signal for luminance and

En 132Video signal flowVideo signals input from a video device to this unit are output to a TV as shown below.(solid line) is always available. (dott

En 133HDMI ControlHDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to this unit with an HD

En 134HDMI signal compatibilityAudio signalsVideo signalsThis unit is compatible with the video signals of the following resolutions:- 480i/60 Hz - 72

En 135• The area around the video/audio output jacks is marked in white on the actual product.Reference diagram (rear panel)+12V 0.1A MAX.AC INTRIGGER

En 136Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Manufactured

En 137❑ Input jacks• Analog AudioAudio x 10 (AV1~4, AUDIO1~4, PHONO, V-AUX)MULTI CH INPUT (8ch) x 1(FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R

En 138❑ Audio Section• Rated Output Power(20 Hz to 20 kHz, 0.06% THD, 8Ω)Front L/R ...110 W+

En 139❑ AM section• Tuning Range[U.S.A. and Canada models] ... 530 kHz to 1710 kHz[Asia and General models]... 530/531 kHz to 1710/1

En 14This unit has 7 built-in amplifiers. You can connect 2 to 9 speakers and up to 2 subwoofers (with built-in amplifier) to create the favorite acou

© 2011 Yamaha CorporationYD503B0/OMEN2

En 15Basic speaker configuration Placing speakers in your roomDepending on the number of speakers, place the speakers and subwoofer (with built-in am

En 16❑ 5.1 channel systemThis speaker system creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce a stereos

En 17 Connecting speakersConnect the speakers placed in your room to this unit. Speakers to be connectedIf you have 7 speakers, use two of them as su

En 18❑ Connecting speaker cablesSpeaker cables have two wires. One is for connecting the negative (-) terminal of the unit and the speaker, and the ot

En 19Advanced speaker configurationIn addition to the basic speaker configuration (p.15), this unit also allows you to apply the following speaker con

En 2CONTENTSAccessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5What you can do wi

En 20 Available speaker configurations• When applying one of these configurations, you need to configure the “Power Amp Assign” setting (p.99) in the

En 21❑ 5ch BI-AMP +SB ❑ 7ch +1ZONEBi-ampvia external ampSpeaker Connect to FRONT and EXTRA SP (bi-amp connection)CENTER SURROUND SUR.BACK (PRE OUT)

En 22 Connecting front speakers that support bi-amp connectionsWhen using front speakers that support bi-amp connections, connect them to the FRONT j

En 23 Connecting an external power amplifierWhen using an external power amplifier to enhance speaker output, connect the input jacks of the power am

En 24 Video/audio jacks❑ HDMI jacksTransmit digital video and digital sound through a single jack. Use an HDMI cable.• Use a 19-pin HDMI cable with t

En 25Connect a TV to this unit so that videos input to this unit can be output to the TV.You can also enjoy playback of TV audio on this unit.The conn

En 26❑ Necessary settingsTo use HDMI Control and ARC, you need to configure the following settings.For details on settings and operations of your TV,

En 27 Connection method 2 (HDMI Control-compatible TV)Connect the TV to this unit with an HDMI cable and an audio cable (digital optical or stereo pi

En 283Configure the settings for HDMI Control.a Enable HDMI Control on the TV and playback devices (HDMI Control-compatible BD/DVD player, etc).b Turn

En 29 Connection method 4 (TV without HDMI input jacks)Depending on the video input jacks available on your TV, choose one of the following connectio

En 3Playing back music via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Connecting a Bluetooth receiver . . . . . . . .

En 30 Connecting another TV or a projectorThis unit has 2 HDMI output jacks. If you connect another TV or a projector to this unit with an HDMI cable

En 31This unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. For i

En 32 Component video connectionConnect a video device to this unit with a component video cable and an audio cable (digital coaxial, digital optical

En 33 Composite video connectionConnect a video device to this unit with a video pin cable and an audio cable (digital coaxial, digital optical or st

En 34If you select the input source by pressing AV1~4, AUDIO1~4 or PHONO, the audio played back on the audio device will be output from this unit.Conn

En 35Connect the supplied FM/AM antennas to this unit.Assembling and connecting the AM antenna• Unwind the antenna cable from the AM antenna unit only

En 36Connect this unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable).You can enjoy Internet radio or

En 37Connecting video/audio recording devicesYou can connect video/audio recording devices to the AV OUT jacks. These jacks output video/audio signals

En 38Connecting a device compatible with SCENE link playback (remote connection)If you have a Yamaha product that has the capability of the SCENE cont

En 39After all the connections are complete, connect the supplied power cable to this unit and then to an AC wall outlet.7 Connecting the power cableB

En 4Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Troubleshooting . . . . . . . . . . . . . . .

En 40Select a desired on-screen menu language from English (default), Japanese, French, German, Spanish and Russian.1Press RECEIVER to turn on this

En 41By using the Yamaha Parametric room Acoustic Optimizer (YPAO) function, this unit automatically detects speaker connections and distances from th

En 42The following screen appears on the TV.• To cancel the operation, disconnect the YPAO microphone before starting the measurement.6If desired, cha

En 43Measuring at one listening position (single measure)When “Multi Position” is set to “No”, follow the procedure below to make the measurement.• YP

En 44Measuring at multiple listening positions (multi measure)When “Multi Position” is set to “Yes”, follow the procedure below to make the measuremen

En 45Now optimization of the speaker settings is complete.Checking the measurement resultsYou can check the YPAO measurement results.1After the measur

En 46Error messagesIf any error message is displayed during the measurement, resolve the problem and perform YPAO again.Error message Cause RemedyE-1:

En 47Warning messagesEven if any warning message is displayed after the measurement, you can save the measurement results by following on-screen instr

En 48PLAYBACK1Turn on external devices (TV, BD/DVD player, etc.) connected to this unit.2Use the input selection keys to select an input source.3Start

En 49The SCENE function allows you to select the assigned input source, sound program, HDMI output and various settings at once.You can use up to 12 s

En 5AccessoriesCheck that the following accessories are supplied with this product. Remote control Batteries (AAA, R03, UM-4) (x 2) YPAO microphon

En 50Configuring scene assignmentsFollow the procedure below to register the current status (input source, sound program, etc.) to a scene. As necessa

En 51This unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with a favorite sound mode

En 52Enjoying sound field effects (CINEMA DSP)This unit is equipped with a variety of sound programs that utilize Yamaha's original DSP technolog

En 53 Sound programs suitable for music/stereo playback (MUSIC)The following sound programs are optimized for listening to music sources.You can also

En 54 Enjoying stereoscopic sound fields (CINEMA DSP 3D) CINEMA DSP 3D enables to create a natural stereoscopic sound field in your room.CINEMA DSP 3

En 55• You cannot select the Dolby Pro Logic IIx decoders when headphones are connected or when “Surround Back” in the “Setup” menu is set to “None”.•

En 56You can tune into a radio station by specifying its frequency or selecting from registered radio stations.• The radio frequencies differ dependin

En 57Registering favorite radio stations (preset)You can register up to 40 radio stations as presets. Once you registered stations, you can easily tun

En 58Radio Data System tuning(U.K. and Europe models only)Radio Data System is a data transmission system used by FM stations in many countries. This

En 59Operating the radio on the TVYou can view the radio information or select a radio station on the TV.1Press TUNER to select “TUNER” as the input s

En 6FEATURESWhat you can do with this unitSupports 2 to 7 channel (plus front presence) speaker system and up to 2 subwoofer connections. Allows you t

En 60 Browse screen1 Preset station listDisplays the list of preset stations. Use the cursor keys to select a preset station and press ENTER to tune

En 61You can play back iPod music/videos on this unit using a USB cable supplied with iPod, an optional Yamaha iPod dock (such as YDS-12) or an option

En 62 Using an iPod dockRefer to the instruction manual of the iPod dock in addition.1Set this unit to standby mode and connect the iPod dock to the

En 63Playback of iPod contentsWhen using a USB cable or an iPod dock, you can control the iPod with the menu displayed on the TV.• When using an iPod

En 64 Playback screen1 Status indicatorsDisplay the current shuffle/repeat settings (p.65) and playback status (play/pause, etc).2 Playback informati

En 65 Shuffle/repeat settingsYou can configure the shuffle/repeat settings of your iPod.• When using an iPod wireless system, configure the shuffle/r

En 66You can play back music stored on a Bluetooth component on this unit using a Yamaha Bluetooth wireless audio receiver (such as YBA-10, optional).

En 674Select the Bluetooth receiver from the device list and enter the pass key “0000”.“Completed” appears when the pairing is complete.• Depending on

En 68You can play back music files stored on a USB storage device on this unit. Refer to the instruction manuals of the USB storage device in addition

En 69 Browse screen1 Status indicatorsDisplay the current shuffle/repeat settings (p.70) and playback status.2 List name3 Contents listDisplays the l

En 7Full of useful functions!● Connecting various devices (p.31)A number of HDMI jacks and various input/output jacks on this unit allow you to connec

En 70 Shuffle/repeat settingsYou can configure the shuffle/repeat settings for playback of USB storage device contents.• The shuffle/repeat settings

En 71You can play back music files stored on your PC or DLNA-compatible NAS on this unit.• To use this function, this unit and your PC must be connect

En 72• To return to the previous screen, press RETURN.• Files not supported by this unit are not listed (or cannot be selected even if listed).• You c

En 73 Shuffle/repeat settingsYou can configure the shuffle/repeat settings for playback of PC music contents.• The shuffle/repeat settings are shared

En 74You can listen to Internet radio stations using the vTuner Internet radio station database service particularly customized for this unit, providi

En 75• By adding your favorite Internet radio stations to “Bookmarks”, you can access to them quickly from “Bookmarks”. To remove stations from “Bookm

En 76The multi-zone function allows you to play back separate input sources in the room where this unit is installed (main zone) and another room (Zon

En 77 Using an external amplifierConnect the external amplifier placed in Zone2 to this unit with a stereo pin cable. Connecting a video monitor for

En 78 Operating this unit from Zone2 (remote connection)By connecting an infrared signal receiver/emitter to the REMOTE IN/OUT jacks of this unit, yo

En 79❑ Remote connections between Yamaha productsIf you are using Yamaha products that support remote connections like this unit, an infrared signal t

En 8Front panel1 MAIN ZONE Turns on/off (standby) this unit.2 Standby indicatorLights up when this unit is in standby mode under any of the following

En 804Start playback on the external device, or select a radio station.Refer to the instruction manual of the external device.For details on the follo

En 81Registering favorite items (shortcut)You can register up to 40 favorite USB and network contents as shortcuts and access them directly by selecti

En 82Controlling this unit from the web browser (web control)You can control this unit with the web control screen displayed in the web browser.• To u

En 83 Control screen1 PLAY INFOSelects an input source or controls playback for the selected zone.2 TOP MENUMoves to the top menu screen.3 SCENESelec

En 84Viewing the current status Switching information on the front display1Press INFO.Each time you press the key, the display item switches.About 3

En 85You can configure the playback-related settings in accordance with a playback source. Since this menu is operational on the front panel (or on th

En 86 Tone Control (Tone Control)Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of speaker sounds. When connecting headphon

En 87 Extended Surround (EXTD Surround)Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used.Settings Volume Tri

En 88CONFIGURATIONSYou can change the input source settings using the TV screen.1Press ON SCREEN.2Use the cursor keys to select “Input” and press ENTE

En 89 Rename/Icon SelectChanges the input source name and icon displayed on the front display or TV screen.Input sourcesAV1~7, V-AUX, AUDIO1~4, PHONO

En 9 Inside of the front panel cover9 ON SCREENDisplays the on-screen menu on the TV.0 Menu operation keysCursor keys Select a menu or parameter.ENTE

En 90 Video OutSelects a video to be output with the audio input source.Input sourcesTUNER, (network sources), USB, MULTI CHSettings DMC ControlSele

En 915Use the cursor keys and ENTER to change the setting.6To exit from the menu, press ON SCREEN.Scene menu items SaveRegisters the settings current

En 92❑ DetailSelects items to be included as the scene assignments. You can also view the settings currently assigned to the selected scene.To include

En 93You can change the settings of the sound programs and surround decoders using the TV screen.1Press ON SCREEN.2Use the cursor keys to select “Soun

En 94Sound Program menu items• Available items vary depending on the selected sound program or surround decoder. Settings for sound programsThe follo

En 95 Settings for decodersThe following items are available when you set “Decode Type” of “Surround Decoder” to “PLIIx Music” or “Neo:6 Music”.Decod

En 96You can configure the various functions of this unit using the TV screen.1Press ON SCREEN.2Use the cursor keys to select “Setup” and press ENTER.

En 97Setup menu itemsMenu Item Function PageSpeakerAuto Setup Optimizes the speaker settings automatically (YPAO). 41Manual SetupSetting Pattern Regis

En 98NetworkIP Address Configures the network parameters (IP address, etc). 106Network Standby Selects whether or not to turn on this unit by the comm

En 99Speaker (Manual Setup)Configures the speaker settings manually. Setting PatternRegisters two speaker setting patterns and switches between them.