Yamaha RX-V871 Bedienungshandbuch Seite 13

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 127
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 12
En 13
Select the speaker layout depending on the number of speakers and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
For information on the ideal speaker layout, see “Ideal speaker layout” (p.115).
If you have 7 speakers, use two of them as surround back speakers or presence speakers. To reinforce the rear right/left sounds, use them as surround back speakers.
To create a natural stereoscopic sound field, use them as presence speakers.
2 subwoofers connected to this unit output same sounds.
1 Placing speakers
Caution
This unit is configured for 8-ohm speakers at the factory. When connecting 6-ohm speakers, set the speaker impedance of this unit to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers. For
details, see “Setting the speaker impedance” (p.16).
Speaker type Abbr. Function
Speaker system (the number of channels)
7.1+2 7.1 7.1 6.1 5.1 4.1 3.1 2.1
Front (L)
Produce front right/left channel sounds (stereo sounds).
●●●●●●●
Front (R) ●●●●●●●
Center Produces center channel sounds (dialogs, vocals, etc). ●●
Surround (L)
Produce surround right/left channel sounds. Surround speakers also produce surround back channel sounds when
no surround back speakers are connected.
●●●●●
Surround (R) ●●●●●
Surround back (L)
Produce surround back right/left channel sounds.
●●
Surround back (R) ●●
Surround back Produces mixed-down surround back right/left channel sounds.
Presence (L)
Produce CINEMA DSP effect sounds. In combination with CINEMA DSP 3D (p.47), the presence speakers create a
natural stereoscopic sound field in your room.
●●
Presence (R) ●●
Subwoofer
Produces LFE (low-frequency effect) channel sounds and reinforces bass parts of other channels.
This channel is counted as “0.1”. You can connect 2 subwoofers (with built-in amplifier) to this unit.
●●●●●●●
1
Speaker placement
2 3 4 5 6 7 8 9 10
Seitenansicht 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 126 127

Kommentare zu diesen Handbüchern

Keine Kommentare