Yamaha SLG-120NW Bedienungshandbuch

1Thank you for purchasing the Yamaha Silent Guitar. In order to obtain the maxi-mum performance and enjoyment from your Silent Guitar, we urge you to

10Power SupplyThe Silent Guitar operates either on battery power or with an AC adaptor however,it will consume more power when the reverb function is

11Using the Controls Using the LINE OUT jack (Using with a guitar amplifier or powered speaker, etc.)1. Use a standard phone plug cable to connect th

123LINE OUTAUX INPHONESDC-INLINE OUTAUX INAUX VOLMIN MAXAC POWER ADAPTOR : YAMAHA PA-1E OR PA-3C OR PA-D09BATTERY : 9V 6LR61 OR 6F22MADE IN INDONESI

13 AUX IN jack• The AUX IN jack can be used to connect an external stereo signal source to the Silent Guitar.Connecting the audio output of a CD play

14When putting the Silent Guitar into the supplied soft case, remove the left framefrom the Silent Guitar, and then place in the individual parts in t

15SpecificationsNeck MahoganyBody MapleFingerboard Rosewood (SLG-120NW : Ebony)Bridge RosewoodFrame Unit Maple (SLG-120NW : Rosewood/Maple)Strings Nyl

WH98220 R0 Printed in Indonesia07_slg100n_120nw_last.pm65 06.7.26, 10:27 AM4

2SPECIAL MESSAGE SECTION92-BPThis product utilizes batteries or an external power supply (adaptor). DO NOTconnect this product to any power supply or

3Your Silent Guitar will give you years of reliable service if you follow the simple rulesgiven below: LocationDo not expose it to the following cond

4Main Body/AccessoriesAfter opening the packaging, please check that all the parts listed below are in-cluded.• Main body• Left frame• AC adaptor : PA

5Nomenclature● Front ● RearFingerboardNeckSaddleTuning pegNutBodyPickup(underneaththe saddle)Controls → See page 6.Frame attachment screw 1(Doubles a

6● ControlsVOLUME controlBattery compartmentREVERB switchPOWER lampAUX IN jackAUX INlevel controlCord hookLINE OUT jackDC-IN jack(Power adaptor connec

7When shipped from the factory, the left frame is not attached to the Silent Guitar’smain body.Before using the instrument, please properly attach the

8TuningUse a tuning meter, pitch pipe, tuning fork, piano, etc., and tune the open strings tothe pitches shown below.• If the string’s pitch is high,

9Changing Strings1. Thread the string through the corresponding string hole on the bridge, then tie the string as shown in theillustration below.After