Yamaha DTX542K Handbuch PDF herunterladen

This manual describes the standard assembly procedure for the DTX522K and DTX542K electronic drum kits. It covers assembly and wiring of the kit as

shown below. When you have completed all of the steps described, you will be ready to turn on the drum module and start playing.

This manual describes the process of assembling drum pads and a

drum module to an already assembled RS502 Electronic Drum Rack.

Before starting the steps below, therefore, be sure to assemble your

RS502 as described in the Owner’s Manual that came with it.

Before starting assembly, lay a drum mat (sold separately) on the floor.

Alternatively, you can place cardboard from the drum kit packaging or

the like on the floor to prevent it from being scratched. This is particu-

larly important when using the HH65 Hi-hat Controller and KP65 Kick

Pad.

The purpose of the precautions detailed below is to ensure that this electronic drum kit can be used safely without fear of injury or property damage. As a means of indicating

the severity and immediacy of any risk of injury or property damage resulting from incorrect operation, these precautions are classified as either WARNING or CAUTION. The

instructions displayed together with these precautions are extremely important in terms of ensuring safety, and therefore, they should be fully observed.

* After reading this Assembly Manual, ensure that it is kept in a safe, convenient location for future reference.

* Be sure to also read the Assembly Manuals and/or Owner’s Manuals that came with your pads and rack.

NOTICE: Usage Precautions

• When connecting and disconnecting cables, be sure to hold the plug and not the cable itself. In

addition, avoid placing heavy items on top of cables and do not allow them to touch sharp edges.

Failure to avoid these precautions can lead to cable breakage and disconnection.

• Do not climb onto the electronic drum kit and avoid placing heavy objects on it. Failure to observe

this precaution can result in malfunction.

• Avoid using or storing the electronic drum kit in very hot locations (i.e., in direct sunlight, in close

proximity to a heater, or in a closed vehicle) or in highly humid locations (i.e., in a bathroom or out-

doors in wet weather). Failure to observe this precaution can lead to warping, discoloration, mal-

function, or breakdown.

• Avoid cleaning the electronic drum kit with organic solvents, paint thinner, or alcohol as these sub-

stances can cause warping and discoloration. Instead, we recommend you remove dust using a soft

dry cloth or wipe clean using a moist, tightly-wrung cloth. If the electronic drum kit is very dirty, first

wipe the dirt away using a cloth moistened with a neutral detergent solution and tightly wrung. Fol-

lowing this, wipe away the detergent solution using a cloth soaked in water and tightly wrung.

* Yamaha Corporation reserves the right to change or modify products or specifications at any time without prior notice.

DTX522K/DTX542K Assembly Manual

Safety Precautions Please read carefully before proceeding.

Example of standard assembly

Cymbal pad

Tom pad

Tom pads

Kick pad

Snare pad

Hi-hat controller

Drum module

Cymbal pad

(hi-hat)

Electronic drum

rack

Cymbal pad

IMPORTANT

NOTICE

Failure to observe the precautions described below can result in

serious injury or even death.

• Young children using this electronic drum kit should be supervised by a guardian to eliminate any

possibility of injury.

• Holders for cymbal and tom pads have sharp tips. In order to avoid injury, therefore, you should

take special care whenever handling these components.

• The anti-slip stoppers on kick pads and foot pedals have sharp tips. In order to avoid injury, there-

fore, you should take special care whenever handling these components.

• Be sure to securely tighten nuts and other fasteners when setting up this electronic drum kit. In

addition, be sure to proceed slowly when loosening nuts. If this precaution is not observed, pads

may fall off or the rack may collapse or fall over, possibly causing injury.

• Do not setup this electronic drum kit on a slope, on an unstable platform, or on any other unsafe

surface. If this precaution is not observed, it may topple over or fall, possibly causing injury.

• Whenever setting up this electronic drum kit, ensure that cables and the like are arranged safely. If

someone were to trip on a cable, the kit could topple over and cause injury.

• Under no circumstances should this electronic drum kit be disassembled or customized. Failure to

observe this precaution can result in injury or malfunction.

• Do not sit or stand on the rack. Doing so could cause it to fall over or break, possibly causing

injury.

WARNING

Failure to observe the precautions described below can result in

injury and/or property damage.

• Mind your fingers when adjusting clamps. They can easily be crushed if care is not taken during

this operation.

• Be careful with the tips of supports, arms, screws, and the like. Fingers can easily be injured by

sharp tips if these components are not handled carefully.

• Do not place hands or feet under a kick pad or foot pedal. Doing so could result in injury.

• Do not use the electronic drum kit’s rack to hold acoustic drums. Doing so could cause clamps to

break and the drums to fall off, which in turn could lead to injury.

CAUTION

Open the boxes to reveal their contents.

After opening up the packages containing your electronic drum kit, please verify that all of the following components are present.

Assemble the RS502 Electronic Drum Rack.

For instructions on how to assemble the RS502 Electronic Drum Rack, refer to the Owner’s Manual that came with it.

Assemble the hi-hat holder, the pads, and the drum module to the electronic drum rack.

Components of both DTX522K & DTX542K

 XP80 Snare Pad

(x1)

 PCY135 Cymbal Pad

(x1)

 PCY100 Cymbal Pad

(x2)

 KP65 Kick Pad

(x1)

 RS502 Electronic Drum Rack (x1)

 RS502 Owner’s Manual (x1)

 HH65 Hi-hat Controller

(x1)

 Hi-hat holder (x1)  Nine-channel snake cable (x1)

 Stopper for PCY100 and PCY135

(x3)

 Cable band (x6)  Tuning key (x1)

 Felt pad for

PCY135 (x1)

 Felt pad for

PCY100 (x2)

 DTX522K/DTX542K Assembly Manual (this booklet; x1)

 PCY100/135/155 Owner’s Manual (x1)

 HH65 Owner’s Manual (x1)

 XP70/80 Owner’s Manual (x1)

 KP65 Owner’s Manual (x1)

 DTX502 Drum

Module (x1)

 Power adaptor (x1)

 Module holder (x1)  Module holder

screw (x2)

 DTX502 Owner’s Manual (x1)

Components of DTX522K only

 TP70 Tom Pad (x3)  Clamp bolt

(for XP80; x1)

 Wing bolt

(for TP70; x3)

 TP70 Owner’s Manual (x1)

Components of DTX542K only

 XP70 Tom Pad (x3)  Clamp bolt

(for XP70 or XP80; x4)

* May not be included

depending on your

particular area. Please

check with your Yamaha

dealer.

1. Remove the drum module clamp a and the left leg b from the left side of the

rack.

2. Assemble the holder clamp for the hi-hat holder, ensuring that it is oriented as

shown in the figure. Following this, reassemble the left leg b and the drum mod-

ule clamp a.

Drum module

clamp a

Left leg b

Drum module

clamp

Left leg b

Holder clamp

Hi-hat holder

Assembling the hi-hat holder

Continued on rear.

U.R.G., Digital Musical Instruments Division

211POAP*.*-01A0

Printed in Vietnam

ZE16420

1 2

Inhaltsverzeichnis

Seite 1 - Assembly Manual

This manual describes the standard assembly procedure for the DTX522K and DTX542K electronic drum kits. It covers assembly and wiring of the kit as sh

Seite 2 - Each cymbal and hi-hat pad

 Snare pad1. Attach a clamp bolt to the snare pad and provision-ally tighten (by five or six turns).2. Push the snare pad onto the rack’s snare holde

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha DTX542K Handbuch

Stöbern Sie online oder laden Sie Handbuch nach Musiktrommeln Yamaha DTX542K herunter. Yamaha DTX522K User manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musiktrommeln Yamaha DTX542K