Yamaha RX-V495 Bedienungshandbuch PDF herunterladen (Seite 21)

English

IMPEDANCE SELECTOR SWITCH

Select the position whose requirements your speaker system

meets.

(Upper position)

Main: If you use one pair of main speakers, the impedance of

each speaker must be 4 Ω or higher.

If you use two pairs of main speakers, the impedance

of each speaker must be 8 Ω or higher.

Center: The impedance of the speaker must be 6 Ω or higher.

Rear: The impedance of each speaker must be 6 Ω or

higher.

(Lower position)

Main: If you use one pair of main speakers, the impedance of

each speaker must be 8 Ω or higher.

If you use two pairs of main speakers, the impedance

of each speaker must be 16 Ω or higher.

The impedance of each speaker must be 8 Ω or

higher.

Center: The impedance of the speaker must be 8 Ω or higher.

Rear: The impedance of each speaker must be 8 Ω or

higher.

WARNING

Do not change the IMPEDANCE SELECTOR switch setting

while the power to this unit is on, otherwise this unit may be

damaged.

If this unit fails to turn on when the STANDBY/ON switch is

pressed, the IMPEDANCE SELECTOR switch may not be

fully set to either end. If so, set the switch to either end fully

when this unit is in the standby mode.

IMPEDANCE SELECTOR

(U.S.A. model)

01RX-V495-e/f-2 6/22/99, 1:32 PM21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 65 66

Keine Kommentare

Yamaha RX-V495 Bedienungshandbuch Seite 21