Yamaha 15 Bedienungshandbuch PDF herunterladen (Seite 35)

English

B Select the desired Variation Type.

Use the VALUE buttons. For a list of the available Variation Types,

see page 60.

N Set the Send Level control to the desired value.

Once you’ve selected a Variation Type to your satisfaction, you can

re-adjust the effect level for the selected Part (and other Parts, too).

To do this, repeat steps #1 and #3 above.

M Set the Dry Level control to the desired value.

This parameter gives you additional fine control over the Variation

effect balance. Setting this to a low value turns down the level of

the “dry” sound and emphasizes the Variation effect sound.

To do this, simultaneously hold down the PLAY/EDIT button and

press the DRY LVL button, and then set the value by using the

VALUE buttons.

Playing the MU15

DryLevel

Using the “INS” (Insertion) Setting

The “INS” (Insertion) setting lets you dedicate the Variation

effect to a single selected Part.

NOTE

• For the “INS” setting, the Send Level parameter can only be

turned on or off for the selected Part, and the Dry Level

parameter is unavailable.

1) Select the desired Part.

2) Set Variation Connection to “INS.” Simultaneously hold

down the PLAY/EDIT button and press the INS SYS button,

and then press the VALUE

/NO button.

3) Set the Send Level for the Part to “on.” Simultaneously

hold down the PLAY/EDIT button and press the VARIATION

SEND LVL button, and then press the VALUE

/YES button.

4) Select the desired Variation Type in the same way as

described in steps #4 and #5 in the main instructions above.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 111 112

Keine Kommentare

Yamaha 15 Bedienungshandbuch Seite 35