Yamaha CX-A5100 Handbuch PDF herunterladen

Choose from the following 2 methods to update to the latest firmware.

Click here for

Firmware Update Through the Internet

(Connection to the Internet is required)

Click here for

Firmware Update by USB

(A USB thumb drive is required)

In case of error, see the

Troubleshooting

section

IMPORTANT NOTICE

Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the

Yamaha website or through your network connection.

Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by

Yamaha.

Improperly updated products may cause improper operation, and any parts or service required to restore proper

operation will not be covered under the Yamaha Limited Warranty.

FIRMWARE UPDATING PROCEDURE

1 2 3 4 5 6

1 Choose from the following 2 methods to update to the latest firmware. Click here for Firmware Update Through the Internet (Connection to the Intern

2 UPDATE SUCCESS POWER OFF! PLEASE...MAIN ZONE key2 Enter the ADVANCED SETUP mode PROGRAM keyFirmware Update Through the Internet Requirement: Inter

3 5 Check the updated firmware version a. Power on the AV receiver and press the ON SCREEN key on the remote control. b. Select “Information” >

4 Firmware Update by USB Requirement: USB thumb drive, with enough free space to store over 25MB. (File system with FAT16 or FAT32 format) Firmware

5 UPDATE SUCCESS POWER OFF! PLEASE...6 Start firmware update a. Press INFO (WPS) key to start the update. (Update process may take up to 10 minutes)

6 UPDATE SUCCESS POWER OFF! PLEASE...USBFIRM UPDATE CASE 1 Error message appeared during the update Cause: For some reason, the receiver can’t read

Weitere Dokumente für Nein Yamaha CX-A5100

Keine Kommentare