Yamaha CDR-S1000 Bedienungsanleitung PDF herunterladen (Seite 24)

E-21

RECORDING FUNCTIONS

CD-RW discs can be erased and new recordings can be

made after material has been erased. The following types

of erasing are possible with this unit.

Last Track Erase

Erases the last track. This operation is not possible on a

CD-RW disc that has been finalized or when only one

track has been recorded on the disc.

All Track Erase

Erases all of the tracks recorded on the disc. This

operation is not possible on a CD-RW disc that has been

finalized.

TOC Erase

TOC Erase is only available on a CD-RW disc that has

been finalized. After the TOC is erased, the effects of

finalization are defeated, and further recording is possible.

Disc Erase

This operation deletes all data on the disc. It is usually not

necessary to perform this function, however, it may be

used to recover a disc that was stopped during a

finalization or erase operation, etc.

To select an erase mode

Each time ERASE is pressed, the Erase mode changes as

follows.

CD-RW discs that have not been finalized:

Erase off = Last Track Erase = All Track Erase

Finalized CD-RW discs:

Erase off = TOC erase

All CD-RW discs:

Holding down ERASE for at least 2 seconds initiates

Disc Erase.

Note

• When there is only one track recorded on a CD-RW that has

not been finalized, only All Track Erase is possible.

IMPORTANT

•Do not turn off the power during an erase

procedure as this could cause the player to

malfunction and make the disc unusable.

•If the message “Check Disc” appears during an

erase operation and erasing stops, the disc may be

damaged. Should this occur, inspect the disc and

then try erasing it again.

Last Track Erase

1 Load a CD-RW disc that has been recorded on.

• This function is not possible on a finalized

CD-RW disc.

2 Press ERASE.

• “Erase LAST?”, appears in the display.

• If you want to cancel the Erase mode, press &

(STOP & on the remote).

3 Press ^ (PLAY # on the remote) to start the Last

Track Erase process.

• This operation requires several seconds to

complete.

• During Last Track Erase, “Erase” and the

remaining time to completion appear in the display.

4 The recorder stops when Last Track Erase is

complete.

Track and Disc Erase

(CD-RW discs only)

EFFECT

FINALIZE

STOP PAUSE PLAY

SKIP

ERASE REC

REC MUTE

123

456

789

+10

INDEX

REPEAT RANDOM CLEAR PROG

REC MODE

TRACK NO.

WRITE

DIMMER DISPLAY

OPEN/

NATURAL SOUND CD RECORDER CDR-S1000

POWER

FINALIZE ERASE DISPLAY

TRACK NO.

EFFECT

REC MODE

OPEN/CLOSE

CD DIRECT

REC

INPUT

PHONES

REC LEVEL

LEVEL

DIGITAL/ANALOG

MIN MAX

010

OPTICAL

COAXIAL ANALOG

REC

MUTE

ERASE

PLAY #

STOP &

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha CDR-S1000 Bedienungsanleitung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Akustik Yamaha CDR-S1000