Yamaha LS9 Bedienungshandbuch PDF herunterladen (Seite 34)

LS9 Editor Owner’s Manual

I ATTACK

Speciﬁes the time from when the key-in signal exceeds the threshold level until the signal starts being compressed.

J GAIN

Adjusts the gain of the signal after it has passed through the compressor.

K RELEASE

Speciﬁes the time from when the key-in signal falls below the threshold level until compression is removed.

L KEY IN SOURCE

Click this to select the key-in signal that you want to use.

The choices are the same as for GATE.

If DE-ESSER is selected

A TYPE

This indicates that De-Esser is the currently selected type.

B LIBRARY

This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY

window.

C ON

This button switches the de-esser on/off.

D Response curve

Indicates the response for the de-esser of the currently selected channel.

E GR meter

This meter indicates the amount of gain reduction produced by the de-esser.

F THRESHOLD

Speciﬁes the threshold level at which the de-esser will operate. The input signal will start being compressed when

the key-in signal exceeds this level; compression will be removed when the signal falls below this level.

G FREQ. (Minimum frequency)

Speciﬁes the minimum frequency at which the key-in signal will activate the de-esser.

H KEY IN SOURCE

This indicates the key-in signal that will be used. It is ﬁxed at SELF POST EQ.

2 35

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 79 80

Keine Kommentare

Yamaha LS9 Bedienungshandbuch Seite 34