Yamaha E8D Bedienungshandbuch PDF herunterladen (Seite 41)

Maintenance

6. Insert a new cotter pin in the holes, and

then bend the cotter pin ends.

NOTE:

There is a holder on the bottom cowling for

spare shear and cotter pins. Be sure to re-

place any used pins.

EMU29280

Changing gear oil

WARNING

EWM00800

● Be sure the outboard motor is securely

fastened to the transom or a stable

stand. You could be severely injured if

the outboard motor falls on you.

● Never get under the lower unit while it is

tilted, even when the tilt support lever or

knob is locked. Severe injury could oc-

cur if the outboard motor accidentally

falls.

1. Tilt the outboard motor so that the gear oil

drain screw is at the lowest point possi-

ble.

2. Place a suitable container under the gear

case.

3. Remove the gear oil drain screw.

NOTE:

If the magnetic gear oil drain screw equipped:

remove all metal particles from the screw be-

fore installing it.

4. Remove the oil level plug to allow the oil

to drain completely.

CAUTION:

ECM00710

Inspect the used oil after it has been

drained. If the oil is milky, water is getting

into the gear case which can cause gear

damage. Consult a Yamaha dealer for re-

pair of the lower unit seals.

NOTE:

For disposal of used oil consult your Yamaha

dealer.

5. With the outboard motor in a vertical po-

sition, and using a flexible or pressurized

filling device, inject the gear oil into the

gear oil drain screw hole.

ZMU02714

1. Gear oil drain screw

2. Oil level plug

Recommended gear oil:

Hypoid gear oil SAE#90

Gear oil quantity:

230.0 cm³ (7.78 US oz) (8.11 Imp.oz)

U67720E0.book Page 36 Friday, March 26, 2004 10:36 AM

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 49 50

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha E8D Bedienungshandbuch Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motor Yamaha E8D