22 Nm
16 ftlb
4.9Nm
3.6ftlb
www.akrapovic.com
10
Reattach the stock right lower and upper parts of the cowling and tighten the marked stock bolts to a specied
torques (Figure 14).
8.
Figure 13
Figure 14
Position the mufer correctly and slide it onto the outlet side of the link pipe and attach the spring. Align the mufer in
respect to the motorcycle and tighten the mufer clamp using Akrapovič bolt and washer (Figure 13).
WARNING: make sure, that spring pull the mufer all the way onto the link pipe – use rubber mallet if neces-
sary to tap the connection into place!
7.
Kommentare zu diesen Handbüchern