Yamaha MCX-2000 Einstellungsanleitung PDF herunterladen (Seite 11)

MCX-2000 Setup Guide

With Easy Setup, you can quickly and easily conﬁgure your desired MusicCAST network just by following the simple on-

screen instructions (page 27). To create a network comprised of an MCX-2000 with clients, specify the options listed

below. When the proper settings have been made, a simple diagram of your system appears in the display.

Enter the following settings:

•

Language:

Select a language used for screen messages.

•

Date and Time:

Set the current date and time.

•

System conﬁguration selection:

Select “Use the MCX-2000 in conjunction with MCX-A10/C15 clients”.

•

Network connection selection:

Select “Connect to a network containing MusicCAST components only”.

•

Network settings conﬁguration:

Select “Automatic conﬁguration”.

After you’ve made these settings, a diagram of the speciﬁed MusicCAST system (in this case, a MusicCAST-only network

with the MCX-2000 and clients) is shown in the display.

n To select a displayed item, move the highlight on it using the up or down arrow button, and then press the SELECT button. The SELECT button

also lets you alternately select and deselect a radio button. When you specify a value, use the up or down arrow button to display a desired value,

and then press the SELECT button (page 19).

From the next screen, you will need to operate the MCX-2000 and each client to conﬁgure the MusicCAST network.

2 Turn on each client as instructed in the on-screen message. If you’re using a network hub for wired clients, you should

turn on the hub at this time. When you’re ready, go to the next screen.

Power

Network hub

MCX-A10

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 131 132

Keine Kommentare

Yamaha MCX-2000 Einstellungsanleitung Seite 11