Yamaha MX200-16 Betriebsanweisung PDF herunterladen (Seite 14)

SSeettuupp

Bargraph LEDs stay lit, too much

signal is being sent to the MX200;

reduce the Aux Master or Aux send on

the mixer.

9. Turn up the Aux Return to the 12

o’clock position (or line input faders to

the 0db positions, if you used that

connection).

10. To increase or decrease the amount of

effect on the signal, adjust the Aux

Send level on the channel that you

want affected.

Mixer - Dual Mono Setup

This setup applies to a mixer with two (or

more) Aux Sends and Returns. It utilizes

the two effect sections in the MX200 as

two separate effects with separate mono

outputs, or a common stereo output.

1. Select routing 1 or 4 using the

Routing

button.

2. Connect Aux 1 send to the MX200 Left

input.

3. Connect Aux 2 send to the MX200

Right input.

4. Connect the MX200 Left and Right

outputs to the mixer’s Aux returns 1 and

2 for mono, or Stereo Aux L/R returns

for stereo.

5. Set

Mix 1 and Mix 2 knobs fully

clockwise (Wet).

6. Set the MX200’

s

Input knob to the 12

o’clock position.

7. Set the Aux Return levels on the mixer

to 12 o’clock.

8. Turn up Aux Sends 1 and 2 on the

mixer for the selected channels so the

red

Input Bargraph LEDs only light

occasionally with signal (adjusting the

Input knob on the MX200 may be

necessary).

9. Control the amount of effect using the

Aux Send levels on the selected mixer

channels.

Serial Connections

Guitar - Effects Loop Setup

1. Select routing 2 using the Routing

button (you can always experiment

using other routings).

2. Connect guitar to the amp’s Input.

3. Connect the amp Effects Loop Send or

Preamp Out to the MX200’s

Left input.

4. Connect the MX200’s Left output to the

amp’s Effects Loop Return or Power

Amp In.

5. Set

Mix 1 and Mix 2 knobs to the 12

o’clock position.

6. Adjust the

Input level so the red Input

Bargraph LEDs only light occasionally

with signal.

7. To adjust the effect level, use the

Mix 1

and Mix 2 knobs.

Preamp

Out

Power Amp

In

Aux

Send 1

Aux

Return 1

Aux

Send 2

Aux

Return 2

8

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare