Yamaha YSP-1100 Bedienungsanleitung

OYAMAHAYSP-llOOOWNER’S MANUAL

CONTROLS AND FUNCTIONSFront pane!© OPTIMIZER MIC jackUse to connect the supplied optimizer microphone to be used to run AUTO SETUP (see page 30).© Fro

YAMAHA Home Audio products are designed and manufactured to provide a high level of trouble-free performance. YAMAHA Electronics Corporation, USA, is

EnglishYSP-nOO QUICK REFERENCE GUIDEThis quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the surround s

Connecting externalConnect external component such as a TV or DVD player to this unit.Connect your TV or DVD player to this unit using appropriate cab

Carry out the AUTO SETUP (IntelliBeam) procedure to adjust the settings that best match your listening environment.This unit employs the YA

Enjoy TV or DVD audio in surround sound.For instructions on your TV or DVD player, refer to the owner’s manual supplied with each component.Before car

CONTROLS AND FUNCTIONSFront panel display(T) ®InightIÌìLeepI fliflii iiiia !

CONTROLS AND FUNCTIONSRear panel© RS-232C/REMOTE IN terminalsThese are control expansion terminals for factory use only (see page 23).© DVD COAXIAL DI

CONTROLS AND FUNCTIONSRemote controlThe functions of some buttons change depending on the position of the operation mode selector ((g)). This section

CONTROLS AND FUNCTIONS® TV POWERTurns on the power of the TV or sets it to the standby mode (see page 82).® AV POWERTurns on the power of the selected

INSTALLATIONThis section describes a suitable installation location to install the unit using a metal wall bracket, a rack or a stand.Before installin

INSTALLATION Installation examplesExample 1Install this unit as close to the exact center of the wall as possible.Example 2Install this unit so that

Using a metal wall bracketYou can use the optional metal wall bracket to mount this unit on the wall in your listening room.Metal wall bracketINSTAL

INSTALLATION Affixing this unitPeel off the film from each of the four supplied fasteners and then secure them to the bottom four comers of this unit

CONNECTIONSThis unit is equipped with the following types of audio/video input/output jacks:For audio input For video input• 2 optical digital input

IMPORTANT SAFETY INSTRUCTIONSCAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO

CONNECTIONSConneeting a TVConnect a TV to this unit and display the OSD for easy viewing when you adjust the system parameters in SET MENU. Audio con

CONNECTIONSConnecting a DVD player/recotderConnect a DVD player/recorder and enjoy DVDs. Audio connectionsConnect the optical digital output jack of

CONNECTIONSConnecting a VCRConnect a VCR and enjoy video cassette tapes. Audio connections Video connectionsConnect the analog audio output jacks

CONNECTIONSConnecting a digital satellite tuner or a catie TV tunerdigital satellite broadcasting or cable TV broadcasting.Connect a digital satellite

CONNECTIONSConnecting a digital airwave tunerIf your digital airwave tuner does not support analog broadcasting, make audio/video connections as shown

CONNECTIONSConnecting other external componentsTo connect other external components, connect the optical digital output jack of an external component

CONNECTIONSConnecting a subwooferTo connect a subwoofer, connect the monaural input jack of your subwoofer to the SUBWOOFER jack of this unit.If a sub

CONNECTIONSConnecting the power supply cableOnce all other connections are complete, plug one end of the power supply cable into the AC IN terminal of

GETTING STARTEDInstalling batteries in the remote controlRemove the transparent sheet before using the remote control.1 Press and hold the ^ mark on

GETTING STARTEDUsing the remote controlTurning on the powerThis section describes how to control this unit using the supplied remote control. The func

IMPORTANT SAFETY INSTRUCTIONSFCC INFORMATION (for US customers)1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated

USING SET MENUDisplaying the OSDThis section simply describes how to display the OSD (on-screen display) of this unit on your TV screen and set the pa

USING SET MENUThe flow Chart Of SET MENUThe following diagram illustrates the overall flow of the setup procedure.Run LANGUAGE SETUP.See “CHANGING OSD

CHANGING OSD LANGUAGEThis feature allows you to select the language of your choice that appears in the SET MENU of this unit.1 Set the operation mode

AUTO SETUP (IntellìBeam)This unit creates a sound field by reflecting sound beams on the walls of your listening room and broadening the cohesion of a

AUTO SETUP (Intel¡¡Beam)Installing the optimizer microphoneThe supplied optimizer microphone collects and analyzes the sound that this unit produces i

AUTO SETUP (IntelliBeam)Using AUTO SETUP (InlelllBeam)Once the optimizer microphone is firmly connected to this unit and properly placed in your liste

AUTO SETUP (IntelliBeam)Notes• Make sure that your listening room is as quiet as possible while this unit is performing the AUTO SETUP procedure.• To

AUTO SETUP (Intelli Beam)Press ^ to select BEAM+SOUND OPTIMZ, BEAM OPTIMZ only or SOUND OPTIMZ only and then press ENTER.The following screen appears

AUTO SETUP (InternBeam)Check that the following screen is displayed on your TV.The results of the AUTO SETUP procedure are displayed on your TV.Exampl

AUTO SETUP QnteUiBeam) Error messages for AUTO SETUP Before the AUTO SETUP procedure startsError messageCauseRemedySeepageERROR E-2No MIC Detected. P

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for futu

USING THE SYSTEM MEMORYConvenient usage of the system memoryYou can save the current settings adjusted in SET MENU in the system memory of this unit.

USING THE SYSTEM MEMORYPress <1 / [> to select MEM0RY1, MEM0RY2 or MEM0RY3 and then press ENTER.The following screen appears on your TV.Loading

USING THE SYSTEM MEMORY4 Press to select LOAD and then pressENTER.The following screen appears on your TV.6 Press ENTER again.The new parameters are

PLAYBACKSelecting the Ingut sourceYou can play back sound from the components connected to this unit simply by pressing INPUT on the front panel repea

PLAYBACKSet the operation mode selector to YSP to switch to the operation mode of this unit and then press VCR on the remote control to play back a vi

PLAYBACKAdjusting the volumeMuting the soundPress VOLUME +/- on the front panel or on the remote control to increase or decrease the volume level.The

ENJOYING SURROUND SOUNDYou can enjoy multi channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select

ENJOYING SURROUND SOUNDStereo plus 3 beamOutputs normal sound from the front left and right channels and sound beams from the center and surround left

ENJOYING SURROUND SOUND Decoder indicatorsDepending on the input source and the selected surround mode, the indicators in the front panel display lig

ENJOYING SURROUND SOUNDEnjoying 2~channei sources in surround soundThis unit can decode 2-channel sources for 5.1 channel playback so that you can enj

CONTENTSPREPARATIINTRODUCTIONOVERVIEW...2FEATURES...

ENJOYING SURROUND SOUNDAdfusting surround mode parametersYou can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tun

ENJOYING STEREO SOUNDStereo playbackYou can enjoy 2-channel stereo playback by changing the beam mode to the stereo playback using the beam mode butto

PLAYING BACK SOUND CLEARLY (My beam)You can improve listenability in a noisy environment by changing the beam mode to the my beam, outputs sound beams

PLA YING BACK SOUND CLEARL Y (My beam)Using manuahadjust functionYou can adjust the beam angle manually while playing back an input source. This funct

USING SOUND FIELD PROGRAMSThis unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from stereo

USING SOUND FIELD PROGRAMSSound field program descriptionsYou can select from the following sound field programs based on your listening preference wh

USING SOUND FIELD PROGRAMSTaming on CINEMA DSP programsYou can select from three different sound field programs(MUSIC, MOVIE and SPORTS) depending on

USING SOUND FIELD PROGRAMSCheck that MOVIE is displayed in the front panel display and then press MOVIE on the remote control repeatedly (or press <

USING SOUND FIELD PROGRAMSTurning off CINEMA DSP pmgrams Aiiusting CINEMA DSP effect levelsTurn off the CINEMA DSP programs if you want to enjoy the

USING THE VOLUME MODE (Night listening mode/TV volume equal mode)The night listening modes are designed to improve listenability at lower volumes or a

OVERVIEWIt is generally accepted that in order to fully enjoy the benefits of surround sound at home, you must endure the agony of wiring and installi

USING THE VOLUME MODE (Night listening mode/TV volume equal mode)Press <1 / [> on the remote control to adjust the effect level of compression w

USING BASS SOUND ENHANCER (TruBass)This unit can produce the perception of an improved low frequency performance with the aid of the SRS TruBass techn

USING THE SLEEP TIMERUse this feature to automatically set this unit to the standby mode after a specified time period. The sleep timer is useful if y

USING THE SLEEP TIMERCanceling the sleep timer1 Set the operation mode selector to YSP to switch to the operation mode of this unit.wmYSPnPress SLEEP

MANUAL SETUPTo achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to make

MANUAL SETUPUsing MANUAL SETUPUse the remote control to access and adjust each parameter.uYou can adjust the SET MENU parameters while the unit is r

MANUAL SETUPBEAM MENUUse to manually adjust various parameters related to the sound beam output.SET MENU -> MANUAL SETUP ^ BEAM MENU FDSETTIHa PAR

MANUAL SETUPSelect ANGLE TO WALL OR CORNER if this unit is installed in the comer in your listening room. Adjust the width and length of your listenin

MANUAL SETUPHORIZONTAL ANGLE (Horizontal angle)Use to adjust the horizontal angle of beams for each channel. By adjusting the horizontal angle of the

MANUAL SETUPFOCAL LENGTH (Focal length)Use to set the distance from the front of this unit to the focal point of output for each channel and adjust an

FEATURESDigital Sound ProjectorThis unit employs the digital sound projector technology that allows one slim unit to control and steer multiple channe

MANUAL SETUP IMAGE LOCATION (Image location)Use to adjust the direction from which the front left and right channel sound is heard so that the each s

MANUAL SETUPSUBWOOFER SET (Subwoofer set)Use to manually adjust various subwoofer settings.HjjUByUuFhii bhiBASS OUT...FRONTCROSS OUER- .100HzLFE L

MANUAL SETUP DD/DTS Dynamic Range(Dynamic range of Doiby Digitai and DTS signais)Use to select the amount of dynamic range compression. This setting

MANUAL SETUPSelect COMPONENT (1) to assign components to the STB COMPONENT VIDEO IN jacks of this unit. Choices: TV, VCRSelect COMPONENT (2) to assign

MANUAL SETUP INPUT RENAME (Input rename)Use to change the name of the input source in the OSD and the front panel display. Press an input selector bu

MANUAL SETUP OSD SET (OSD settings)Use to adjust the display position and the background color of the OSD.e)ii' SEi4 OSD SHIFT...OSD BACK

ADJUSTING THE AUDIO BALANCEYou can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in

ADJUSTING THE AUDIO BALANCE5 Press TEST when you have completed all your adjustments.Notes• All the channel levels cannot be adjusted when the stereo

ADJUSTING THE AUDIO BALANCENoteSWFR is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND M

SELECTING THE INPUT MODEYou can select the type of audio input signals of the selected input source according to your preference or the conditions of

USING THIS MANUALNotes• This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer

ADJUSTING SYSTEM PARAMETERSThis unit has additional menus that are displayed in the front panel display. These menus offer additional operations to ad

ADJUSTING SYSTEM PARAMETERS4 Press <1 /1> to switch between PROTECT: ON 3 Press ^ ^ on the remote control so that and PROTECT: OFF, MAX VOLUME

ADJUSTING SYSTEM PARAMETERSSetting the TURN ON VOLUMEYou can set the initial volume level when the power of this unit is turned on.1 Repeat steps 1 t

ADJUSTING SYSTEM PARAMETERSPress <1 /1> to switch between DEMO: ON and DEMO: OFF.lU^ UNSetting the FACTORY PRESETYou can reset all of the parame

ADJUSTING SYSTEM PARAMETERS5 Press <1 / t> to switch between PRESET: RESET and PRESET: CANCEL.VOIPRESETS RESET =VOIPRESETS CRHCEL =• Select PR

REMOTE CONTROL FEATURESIn addition to controlling this unit, the remote control can also operate other AfV components made by YAMAHA and other manufac

REMOTE CONTROL FEATURESControlling other components Operating your TVSet the operation mode selector to TV/AV and then press TV to select TV as th

REMOTE CONTROL FEATURESSet the operation mode selector to TV/AV and then press VCR to select VCR as the Input source. Operating your VCR Operating y

REMOTE CONTROL FEATURESUsing the TV macroThe TV macro feature makes it possible to perform a series of operations with the press of a single button. F

REMOTE CONTROL FEATURES Setting macros for the TV without the tuning capability1 Press and hold CODE SET on the remote control and then press one of

SUPPLIED ACCESSORIESCheck that you have received all of the following parts. Remote control (x1)STANDBY/ON POWER POWER(^) oysTBj lIvcRl IÎd^I HauxIIMP

TROUBLESHOOTINGRefer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the i

TROUBLESHOOTINGProblem Cause RemedySeepageDistorted or too little bass sound.CROSS OVER in SUBWOOFER SET is set incorrectly.Set CROSS OVER correctly.6

TROUBLESHOOTINGRemote controlProblemCauseRemedySeepageThe remote control does not work and/or function properly.Wrong distance or angle.The remote con

GLOSSARYAudio formats Dolby DigitalDolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With

AUTO SETUP (IntelliBeam)...29BBeam mode...42. 4T. 4SCable cl

SPECIFICATIONSAMP SECTION• Maximum Output Power (EIAJ)...2 W (1 kHz, 10% THD, 4 n) X 4020 W (1

LIST OF REMOTE CONTROL CODESTVPROSCAN231, 241, 251AIWA396, 397, 398, 329QUASAR 325,328PROTON 297, 250, 260, 270 AKAI322, 323, 324 RCA/PROSCANADMJRAL29

UNIVERSALVIEWSTAR769, 772, 773,774,775 764, 766, 776,777,778,779,782SATELLITE TUNERECHOSTAR822GE 837, 838, 839GENERAL INSTRUMENT 823HITACHI824HUGHES84

SYAMAHAi)2006 YAMAHA CORPORATION Alt rights reserved.YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAH

^YAMAHARegistering Your New Yamaha Product is Fast and EasyThank you for purchasing a new product from Yamaha Electronics. We'd like to continue