Yamaha XF50W Wartungshandbuch PDF herunterladen (Seite 289)

CHECKING THE BULBS AND BULB SOCKETS

CHECKING THE CONDITION OF THE

BULBS

The following procedure applies to all of the

bulbs.

Remove:

8bulb

Since the headlight bulb gets extremely hot,

keep flammable products and your hands

away from the bulb until it has cooled down.

Be sure to hold the socket firmly when

removing the bulb. Never pull the lead,

otherwise it may be pulled out of the

ter-

minal in the coupler.

Avoid touching the glass part of the

headlight bulb to keep it free from oil,

otherwise the transparency of the glass,

the life of the

bulb,

and

the luminous flux

will be adversely affected. If the head-

light bulb gets soiled, thoroughly clean

it with a cloth moistened with alcohol or

lacquer thinner.

Check:

8 bulb (for continuity)

(with the pocket tester)

No continuity -» Replace.

Pocket tester

90890-03112 (YU-03112-C)

NOTE:

Before checking for continuity, set the pocket

tester to “0” and to the “ × 1” range.

•••••••••••••••••••••••

a. Connect the positive tester probe to termi-

nal 1 and the negative tester probe to

ter-

minal 2, and check the continuity.

b. Connect the positive tester probe to termi-

nal 1 and the negative tester probe to

ter-

minal 3, and check the continuity.

c. If either of the readings indicate no continu-

ity, replace the bulb.

•••••••••••••••••••••••

8-7

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 337 338

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha XF50W Wartungshandbuch Seite 289

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Roller Yamaha XF50W