Yamaha CDR400c Series Bedienungsanleitung PDF herunterladen (Seite 134)

Using iXOS-JUKEMAN

iXOS-JUKEMAN 2.2 User Manual Pre.12/97134

In addition to this, no activites or real-time processes, which would over-

load the hard disk or SCSI busses, should be allowed to run while burn-

ing a CD.

If you are unsure about the properties of a device, the cdglow command

should be run with the option -p. Though it is usually not possible to

simulate the laser performance, this option allows the recording process

to be simulated and whether buffer underrun error is likely to occur. If this

is the case, either the buffer can be enlarged or the speed of the CD re-

corder can be reduced with the options -f2 or -f1. If you plan to copy a

CD, it is also possible to copy the contents first to the hard disk to the ISO

9660 standard. The write command will then use this file as the source.

The actual write command is as follows:

cdglow [-p] [-v] [-w] [-c] [-f1|-f2] [-b size]

[-s source] [-t target] [-l length] [-a size]

With this command, the data is is written to the CD (WORM or MO) in ISO

9660 format on a single track.

-p

preview mode: data is received but not burned

-v

on completion, verify that there are no differences between

the source data and what actually now appears on the CD.

-w

write to WORM and MO.

-c

only check the size of the source.

-f1

single-speed recording-the default is the highest possible

speed.

-f2

dual-speed recording

-b <size> size of the RAM buffer (in decimal or hexidecimal) –default

is 8 MB.

-s <source> <source> contains the ISO 9660-file system - default is

stdin.

-S

indicates that the source is not a CD drive.

-t <target> <target> is the CD recorder - default is stdout.

-T

indicates that the target is not a CD recorder. This mode

allows up to 128 KB to be written to the hard disk without a

licence.

-l <length> indicates how many bytes should be written.- default is the

whole ISO image.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 272 273

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha CDR400c Series Bedienungsanleitung Seite 134

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Yamaha CDR400c Series