Yamaha V4.0 Bedienungshandbuch

ENOWNER’S MANUALOWNER’S MANUALVersion 4.0Version 4.0

DME Designer Owner’s Manual10Main Changes from V1.0 to V1.1 Main Panel Window• Instead of the former Parameter Link function, there are now two funct

Chapter 3 Main Panel WindowDME Designer Owner’s Manual100 DesignerThe Designer list displays DME or SP2060 units arranged in the currently valid dev

Chapter 3 Main Panel WindowDME Designer Owner’s Manual101Event Scheduler“Event Scheduler” Dialog BoxWhen you click [Event Scheduler] in the [Tools] m

Chapter 3 Main Panel WindowDME Designer Owner’s Manual102 [Operation] Displays the function that will be executed when the event starts.  [Date]Dis

Chapter 3 Main Panel WindowDME Designer Owner’s Manual103 [Clock setup] ButtonOpens the “Clock” dialog box to set the DME internal clock. See “Cloc

Chapter 3 Main Panel WindowDME Designer Owner’s Manual104 [Event Operation]Set the operation that is executed when the event starts. [Operation]When

Chapter 3 Main Panel WindowDME Designer Owner’s Manual105[Component]Select the component that has the parameter to be changed. The list displays the

Chapter 3 Main Panel WindowDME Designer Owner’s Manual106 [Event Schedule]Set the year/month/date to start the event. CalendarSets the date the even

Chapter 3 Main Panel WindowDME Designer Owner’s Manual107 [Event Exceptions]Specifies “exception” year/month/day and time settings at which events w

Chapter 3 Main Panel WindowDME Designer Owner’s Manual108Wav File ManagerWhen you click [Wav File Manager] on the [Tools] menu, the “Wav File Manager

Chapter 3 Main Panel WindowDME Designer Owner’s Manual109 [Wave File]Displays the Wave file information. Settings can be made here as well. [No.]The

DME Designer Owner’s Manual11Changes from V1.1 to V1.2 Main Panel Window• The synchronization algorithm has been refined for faster synchronization.•

Chapter 3 Main Panel WindowDME Designer Owner’s Manual110 [Recall] ButtonReads a saved library. Clicking this button displays a menu. A menu display

Chapter 3 Main Panel WindowDME Designer Owner’s Manual111 [Remove] ButtonDeletes settings from the selected line. This button is grayed out when no

Chapter 3 Main Panel WindowDME Designer Owner’s Manual112GPIAbout GPIGPI is an abbreviation for General Purpose Interface. Using GPI input and output

Chapter 3 Main Panel WindowDME Designer Owner’s Manual113 Control Source Selection via a CP4SWA CP4SW control panel connected to the GPI terminal ca

Chapter 3 Main Panel WindowDME Designer Owner’s Manual114 [DME]From the list, select the DME where you will be making settings. ConfigurationThe cu

Chapter 3 Main Panel WindowDME Designer Owner’s Manual115The parameter value changes in proportion to the voltage applied to the GPI input.The minimu

Chapter 3 Main Panel WindowDME Designer Owner’s Manual116• [Scene Change]GPI input can be used to recall a specified scene.[Parameter] specifies the

Chapter 3 Main Panel WindowDME Designer Owner’s Manual117• [Scene Decrement]GPI input can be used to decrement the scene number.[Parameter], [Min], a

Chapter 3 Main Panel WindowDME Designer Owner’s Manual118•[Mute]GPI input can be used to engage or disengage the DME mute function.[Parameter], [Min]

Chapter 3 Main Panel WindowDME Designer Owner’s Manual119•[GPI Lock]GPI Lock can be turned on or off via GPI input. When GPI Lock is ON, all GPI inpu

DME Designer Owner’s Manual12• The order of same-time events can be changed in the Event Scheduler. (page 139)• Exceptions can be specified for Event

Chapter 3 Main Panel WindowDME Designer Owner’s Manual120• [Time Adjustment]GPI input can be used to adjust the DME internal clock as follows:[Parame

Chapter 3 Main Panel WindowDME Designer Owner’s Manual121•[Play Wav File]GPI input can be used to initiate playback of the specified Wave file.[Param

Chapter 3 Main Panel WindowDME Designer Owner’s Manual122 GPI OUTThe DME64N has sixteen GPI OUT ports, the DME24N has eight, and the DME Satellite h

Chapter 3 Main Panel WindowDME Designer Owner’s Manual123• [Scene Change]The recall status of the specified scene is transmitted via GPI output.[Para

Chapter 3 Main Panel WindowDME Designer Owner’s Manual124Event SchedulerEvent Schedule is shown when [GPI OUT] is set in “Event Scheduler.”See “Event

Chapter 3 Main Panel WindowDME Designer Owner’s Manual125MIDIWhen you click the [MIDI] command on the [Tools] menu, the “MIDI” dialog box is displaye

Chapter 3 Main Panel WindowDME Designer Owner’s Manual126[Control Change] TabAssigns components to control change for each DME. You can change DME pa

Chapter 3 Main Panel WindowDME Designer Owner’s Manual127ParameterSet the assigned component link parameter. When you click here, a list of parameter

Chapter 3 Main Panel WindowDME Designer Owner’s Manual128[Program Change] TabAssigns scenes to program control change numbers 1 through 128. Switches

Chapter 3 Main Panel WindowDME Designer Owner’s Manual129 [Assign All] ButtonAssigns all scenes in order starting from program number 1.  Bank Sele

DME Designer Owner’s Manual13• User module port labels can be edited. (page 246)• Graphics can be placed to represent user modules. (page 247)• The Le

Chapter 3 Main Panel WindowDME Designer Owner’s Manual130 Parameter Change ListThe current settings are displayed in the list in the center. No.This

Chapter 3 Main Panel WindowDME Designer Owner’s Manual131Min/MaxThis sets the parameter range. The current values for the [Min] (lower limit) and [Ma

Chapter 3 Main Panel WindowDME Designer Owner’s Manual132User Defined Button (User Defined Parameters)User Defined ParametersParameters that the user

Chapter 3 Main Panel WindowDME Designer Owner’s Manual133FunctionSpecifies the function to be assigned to the function keys.•[No Assign]No assignment

Chapter 3 Main Panel WindowDME Designer Owner’s Manual134ParameterSets the parameter assigned to each function key. If you click here, a list will be

Chapter 3 Main Panel WindowDME Designer Owner’s Manual135Setting User Defined Parameters Set the user defined parameter. 1 Create a configuration. 2

Chapter 3 Main Panel WindowDME Designer Owner’s Manual136DAW ControlWhen you click [DAW Control] on the [Tools] menu, the “DAW Control” dialog box is

Chapter 3 Main Panel WindowDME Designer Owner’s Manual137[Function]Selects the function that will be changed by the DAW controller. If you click here

Chapter 3 Main Panel WindowDME Designer Owner’s Manual138[Controller]Selects a controller from the list when [Parameter Value Edit] is set in [Functi

Chapter 3 Main Panel WindowDME Designer Owner’s Manual139Remote Control Setup ListWhen you click the [Remote Control Setup List] command on the [Tool

DME Designer Owner’s Manual14Changes from V1.2 to V2.0 General• Support added for DME8i-C/DME8o-C/DME4io-C, SP2060 units and MY16-CII.• “Device Group

Chapter 3 Main Panel WindowDME Designer Owner’s Manual140[Min]/[Max]Displays the minimum and maximum values for the parameter.[Type]Selects a fader c

Chapter 3 Main Panel WindowDME Designer Owner’s Manual141Internal HA ControlThe gain and phantom power (+48V) of the DME24N/DME8i-C/DME4io-C/DME8i-ES

Chapter 3 Main Panel WindowDME Designer Owner’s Manual142Remote ConnectionConnect the digital mixer to the [REMOTE] connector of one of the DME units

Chapter 3 Main Panel WindowDME Designer Owner’s Manual143CobraNet ConnectionUse a CobraNet interface card such as the MY16-CII to make CobraNet conne

Chapter 3 Main Panel WindowDME Designer Owner’s Manual144EtherSound Connection Digital Mixers Without a [REMOTE] Connector Use an EtherSound interfa

Chapter 3 Main Panel WindowDME Designer Owner’s Manual145 Digital Mixers With a [REMOTE] Connector Connect the mixer’s [REMOTE] connector to the MY1

Chapter 3 Main Panel WindowDME Designer Owner’s Manual146Setting the Internal Head Amp IDClick [Internal HA Control] in the [Tools] menu to open the

Chapter 3 Main Panel WindowDME Designer Owner’s Manual147Parameter ListWhen you click [Parameter List] in the [Tools] menu, the “Parameter List” dial

Chapter 3 Main Panel WindowDME Designer Owner’s Manual148 [Preview] ButtonPrints a list of parameters. When you click this button a preview screen i

Chapter 3 Main Panel WindowDME Designer Owner’s Manual149 [Setup] ButtonClicking here displays the “Print Setup” dialog box. Here you can set the pa

DME Designer Owner’s Manual15• Double-clicking the component name now opens the properties window.• Organization of the Tool Kit window has been chang

Chapter 3 Main Panel WindowDME Designer Owner’s Manual150Component LockClick [Component Lock] in the [Tools] menu to display the Component Lock dialo

Chapter 3 Main Panel WindowDME Designer Owner’s Manual151Scene Link ManagerEither click the [Scene Link Manager] item in the [Tools] menu, or the [Sc

Chapter 3 Main Panel WindowDME Designer Owner’s Manual152 [Delete] ButtonDeletes the scene link setup currently selected in the scene link tree view

Chapter 3 Main Panel WindowDME Designer Owner’s Manual153SP2060 Library ManagerClick the [SP2060 Library Manager] item in the [Tools] menu to open th

Chapter 3 Main Panel WindowDME Designer Owner’s Manual154 [Delete File] ButtonDeletes the selected library from the library list. When this button i

Chapter 3 Main Panel WindowDME Designer Owner’s Manual155Communication Port SetupClick the [Communication Port] item in the [Setup] menu to open the

Chapter 3 Main Panel WindowDME Designer Owner’s Manual156Shortcut KeysClick [Shortcut Keys] in the [Setup] menu to display the “Shortcut Keys” dialog

Chapter 3 Main Panel WindowDME Designer Owner’s Manual157Security (Creating Users and Making User Settings)When you click the [Security] command on t

Chapter 3 Main Panel WindowDME Designer Owner’s Manual158 Security LevelUser security levels are set with the [Operation Security] item at the right

Chapter 3 Main Panel WindowDME Designer Owner’s Manual159Names and Functions[Enable Auto-Log On]Enables auto-logon. If this checkbox is selected, the

DME Designer Owner’s Manual16Changes from V2.0 to V3.0 General• DME8i-ES/DME8o-ES/DME4io-ES support.• The DME Designer and DME-N Network Driver insta

Chapter 3 Main Panel WindowDME Designer Owner’s Manual160User ListThe registered users are displayed here. The currently logged on user is displayed

Chapter 3 Main Panel WindowDME Designer Owner’s Manual1615 Operation SecuritySets the functions that can be used by the user selected on the [User Li

Chapter 3 Main Panel WindowDME Designer Owner’s Manual162“Add User” Dialog Box/“Change User Information” Dialog BoxWhen you click the [Add User] butt

Chapter 3 Main Panel WindowDME Designer Owner’s Manual163Creating UsersUsers are created as follows: 1 Click [Security] on the Main Panel window [Set

Chapter 3 Main Panel WindowDME Designer Owner’s Manual1646 Enter the password into the [Confirm Password] box also. If you do not want to set a passw

Chapter 3 Main Panel WindowDME Designer Owner’s Manual165Network SetupClick the [Network Setup] item in the [Hardware] menu to open the “Network Setu

Chapter 3 Main Panel WindowDME Designer Owner’s Manual166 IP AddressDisplays and sets the IP address of the DME or SP2060 unit connected to the port

Chapter 3 Main Panel WindowDME Designer Owner’s Manual167UtilityClick the [Utility] item of the [Hardware] menu to open the “Utility” window.“Utility

Chapter 3 Main Panel WindowDME Designer Owner’s Manual168 Info Tab Displays basic information for the selected DME or SP2060 unit.VersionDisplays th

Chapter 3 Main Panel WindowDME Designer Owner’s Manual169 Network TabDisplays DME and SP2060 network information.Master/SlaveDisplays the device gro

DME Designer Owner’s Manual17 Designer Window• It is now possible to set a “clear” background color for text, box, and ellipse objects (page 252, pag

Chapter 3 Main Panel WindowDME Designer Owner’s Manual170 Lock TabDisplays and allows editing of the DME64N/24N and SP2060 panel lock parameters.Onl

Chapter 3 Main Panel WindowDME Designer Owner’s Manual171 Misc TabDisplays and sets parameters not provided in the other tabs.Scene StoreDisplays an

Chapter 3 Main Panel WindowDME Designer Owner’s Manual172 Remote TabDME Remote ControlDisplays/sets the connector and connection type to be used for

Chapter 3 Main Panel WindowDME Designer Owner’s Manual173Internal HA ControlDisplays/sets the connector to be used for internal head amp control. Fro

Chapter 3 Main Panel WindowDME Designer Owner’s Manual174 MIDI TabPortSelects the MIDI port to be used. If the selected terminal was previously assi

Chapter 3 Main Panel WindowDME Designer Owner’s Manual175ProtocolDisplays/sets the protocol to be used for communication with devices connected via M

Chapter 3 Main Panel WindowDME Designer Owner’s Manual176 GPI TabCalibrates the input voltage detection range for a DME unit GPI terminal.[ALL] Chec

Chapter 3 Main Panel WindowDME Designer Owner’s Manual177Word ClockThe signal that synchronizes all devices connected to the DME or SP2060 is called

Chapter 3 Main Panel WindowDME Designer Owner’s Manual178 Card (Slot Information)Displays the name of the card inserted into the slot.  Clock Statu

Chapter 3 Main Panel WindowDME Designer Owner’s Manual179Monitor OutWhen you click the [Monitor Out] command on the [Hardware] menu, the “Monitor” di

DME Designer Owner’s Manual18Changes from V3.0 to V3.5 Component• Program Ducker component added (page 412).• (V3.5.1) During installation it is poss

Chapter 3 Main Panel WindowDME Designer Owner’s Manual180ClockWhen you click the [Clock] command on the [Hardware] menu, the “Clock” dialog box is di

Chapter 3 Main Panel WindowDME Designer Owner’s Manual181[Day of the Week]When checked the daylight saving time period can be specified by the day of

Chapter 3 Main Panel WindowDME Designer Owner’s Manual182Language SettingsWhen you click the [Language] command on the [Hardware] menu, the “Language

Chapter 3 Main Panel WindowDME Designer Owner’s Manual183BackupWhen you click the [Backup] command on the [Hardware] menu, the “Backup” dialog box is

Chapter 3 Main Panel WindowDME Designer Owner’s Manual184SP2060 BackupClick [SP2060 Backup] in the [Hardware] menu to open the “SP2060 Backup” dialog

Chapter 3 Main Panel WindowDME Designer Owner’s Manual185 [Restore] TabTa rgetDisplays the label and IP address of connected SP2060 units that are o

Chapter 3 Main Panel WindowDME Designer Owner’s Manual186DME Firmware UpdateYou can update the DME or SP2060 unit, ICP1 firmware using the [Firmware

Chapter 3 Main Panel WindowDME Designer Owner’s Manual187 [Program+Component]Updates the DME/SP2060/ICP1 unit firmware. 1 Select [Firmware Update] 

Chapter 3 Main Panel WindowDME Designer Owner’s Manual188 [Recovery Update]Recovers (restores) the DME, SP2060, or ICP1 firmware. If a cable is unpl

Chapter 3 Main Panel WindowDME Designer Owner’s Manual189 [MY4-AEC]Update the firmware on an MY4-AEC Acoustic Echo Canceller card installed in a DME

DME Designer Owner’s Manual19Changes from V3.5 to V3.8 New Features• The DME64N/24N (V3.8x or later) can now be controlled via Ethernet connection fr

Chapter 3 Main Panel WindowDME Designer Owner’s Manual190Device InformationClick [Device Information] in the [Hardware] menu to open the “Device Info

Chapter 3 Main Panel WindowDME Designer Owner’s Manual191 [MAC Address]Displays the MAC address. [Message]Displays messages being displayed on the

DME Designer Owner’s Manual192Chapter 4 DesignerEditing ConfigurationsConfigurationsInformation about inputs/outputs, along with the arrangement of c

Chapter 4 DesignerDME Designer Owner’s Manual193 Edit Mode ON/OFFThe edit mode can be turned on or off via the [Edit Mode] command in either the [To

Chapter 4 DesignerDME Designer Owner’s Manual194Too lb arFrequently used commands are arranged here as buttons.  [Print] Button (page 203)Prints the

Chapter 4 DesignerDME Designer Owner’s Manual195 [Zoom Out]/[Zoom In]/[Actual Size]/[Zoom To] ButtonsThese buttons correspond to the commands on the

Chapter 4 DesignerDME Designer Owner’s Manual196Resource Meter WindowThe Resource Meter can be displayed or hidden via the [Navigator] command in the

Chapter 4 DesignerDME Designer Owner’s Manual197Navigator WindowThe Navigator window can be displayed or hidden via the [View] menu [Navigator] or th

Chapter 4 DesignerDME Designer Owner’s Manual198 Device GroupIf a group is clicked the zone window of the clicked group will become active. If a win

Chapter 4 DesignerDME Designer Owner’s Manual199Displaying the Toolkit WindowYou can display or hide the Toolkit window using the [Toolkit] command o

DME Designer Owner’s Manual2Getting Started with DME DesignerIn this manual the abbreviation “DME” refers to the DME64N/DME24N/DME8i-C/DME8o-C/DME4io-

DME Designer Owner’s Manual20Changes from V3.8 to V4.0 New Features• The MY4-AEC card can now be selected for I/O card slots. AEC components, which a

Chapter 4 DesignerDME Designer Owner’s Manual200Toolkit Window TypesThe contents of the Toolkit window will vary, depending on which window is active

Chapter 4 DesignerDME Designer Owner’s Manual201[Device List]The Device list displays objects that can be arranged in a Zone window (configuration).

Chapter 4 DesignerDME Designer Owner’s Manual202[Component List] (User Module Window)The Component List displays objects that can be arranged in the

Chapter 4 DesignerDME Designer Owner’s Manual203 Configuration WindowUsed to design configurations for DME units arranged in a zone.  See “Configur

Chapter 4 DesignerDME Designer Owner’s Manual204[Edit] MenuThis menu provides edit commands. [Undo]Undoes the most recent edit operation. Repeatedly

Chapter 4 DesignerDME Designer Owner’s Manual205 [Edit Legend]This command can be selected when an Area window, Zone window, or Configuration window

Chapter 4 DesignerDME Designer Owner’s Manual206 [Full Screen]Displays in full-screen mode. Displays the active design window (Area, Zone, Configura

Chapter 4 DesignerDME Designer Owner’s Manual207[Tools] Menu [Area Parts List]This command can be used only when the Area window is active. A submen

Chapter 4 DesignerDME Designer Owner’s Manual208 [Configuration Manager]Displays the “Configuration Manager” dialog box. Here you can add, delete, o

Chapter 4 DesignerDME Designer Owner’s Manual209 [Arrow]The mouse cursor appears as crosshairs, and can be used to select objects. [Hand]The mouse

DME Designer Owner’s Manual21ContentsGetting Started with DME Designer ... 2SPECIAL NOTICES...

Chapter 4 DesignerDME Designer Owner’s Manual210ObjectsObject TypesThe devices, shapes, and wires that can be arranged in each design window are call

Chapter 4 DesignerDME Designer Owner’s Manual211ZoneThere must be at least one zone in the Area window. Zones are added and deleted using the “Zone”

Chapter 4 DesignerDME Designer Owner’s Manual212 Zone Object PropertiesWhen you select a zone in the Area window, then click the [Properties] comman

Chapter 4 DesignerDME Designer Owner’s Manual213[Style]Sets the style of the object. From the list, select [Plain], [Raised], or [Sunken]. Background

Chapter 4 DesignerDME Designer Owner’s Manual214DME64NDME8i-C/DME8o-C/DME4io-CDME8i-ES/DME8o-ES/DME4io-ESDME64N with no I/O cards connected in slots.

Chapter 4 DesignerDME Designer Owner’s Manual215When I/O Cards Are Installed in DME Expansion Slots When an I/O card is selected for an expansion slo

Chapter 4 DesignerDME Designer Owner’s Manual216CobraNet Card/EtherSound CardIf the I/O card is a CobraNet card or EtherSound card a CobraNet icon or

Chapter 4 DesignerDME Designer Owner’s Manual217 DME Object Context Menu[Open Configuration Window]Opens the Configuration window. See “Configurati

Chapter 4 DesignerDME Designer Owner’s Manual218[Output Level]When you select this command, the “Output Level” dialog box will be displayed. This set

Chapter 4 DesignerDME Designer Owner’s Manual219[Label] BoxYou can enter up to 100 English characters to display over the object. [Width] BoxSpecifie

DME Designer Owner’s Manual22EtherSound Input and Output ... 497MY-Card ...

Chapter 4 DesignerDME Designer Owner’s Manual220I/O CardAllows I/O card setup. [Slot1] ~ [Slot4] can be set up for a DME64N, while only [Slot] is ava

Chapter 4 DesignerDME Designer Owner’s Manual221CascadeTurns the DME 64N cascade ON or OFF. • Show Cascade Port on Configuration WindowChecking this

Chapter 4 DesignerDME Designer Owner’s Manual222Head MarginSets the CASCADE bus signal head margin. This setting only applies when the unit is cascad

Chapter 4 DesignerDME Designer Owner’s Manual223[Check All] ButtonChecks all checkboxes.[Clear All] ButtonClears all checkboxes.[OK] ButtonUpdates th

Chapter 4 DesignerDME Designer Owner’s Manual224ICPYou can arrange DME Device objects in the Zone window. These can be controlled using User Defined

Chapter 4 DesignerDME Designer Owner’s Manual225 ICP PropertiesTo display the “DME Device Properties” dialog box, select a ICP object, then click th

Chapter 4 DesignerDME Designer Owner’s Manual226SP2060SP2060 objects can be placed in the zone window.When clicked an SP2060 in the zone window will

Chapter 4 DesignerDME Designer Owner’s Manual227[Copy]Copies the selected object to the clipboard.[Paste]Pastes the SP2060 object currently on the cl

Chapter 4 DesignerDME Designer Owner’s Manual228 SP2060 PropertiesSelect an SP2060 object and click [Properties] in the [Edit] menu to open the “Spe

Chapter 4 DesignerDME Designer Owner’s Manual229[Port Label Color] ButtonSpecies the color of the I/O port label characters. The “Select Color” windo

DME Designer Owner’s Manual23Chapter 1 Before UsingInstalling DME DesignerTo use DME Designer, you must first install the software on the computer. B

Chapter 4 DesignerDME Designer Owner’s Manual230External DeviceArranges external device objects in the Zone window. External applications can be link

Chapter 4 DesignerDME Designer Owner’s Manual231 External Device Object Context Menu[Open Component Editor] Starts the application assigned to the o

Chapter 4 DesignerDME Designer Owner’s Manual232 External Device PropertiesTo display the “External Device Properties” dialog box, select any extern

Chapter 4 DesignerDME Designer Owner’s Manual233Launch ApplicationThe radio buttons determines whether an application or file will be linked to an ex

Chapter 4 DesignerDME Designer Owner’s Manual234 External Device Properties (AD824, AD8HR “Serial Controlled Device Properties” Dialog Box)To displa

Chapter 4 DesignerDME Designer Owner’s Manual235ComponentComponents are arranged in the Configuration window and the User Module window. They include

Chapter 4 DesignerDME Designer Owner’s Manual236[Recall Component Library]Recalls libraries with component parameters saved in them. Clicking here di

Chapter 4 DesignerDME Designer Owner’s Manual237[Label] BoxYou can enter up to 100 English characters to display over the object.[Width] BoxSpecifies

Chapter 4 DesignerDME Designer Owner’s Manual238SPX ComponentSPX components are arranged in the Configuration window and the User Module window. Comp

Chapter 4 DesignerDME Designer Owner’s Manual239[Store Component Library]Saves the component parameters. Click to display the “Store” dialog box. If

Chapter 1 Before UsingDME Designer Owner’s Manual242 Click the [] at the right of the [User] box, and select the user. If no user has been created,

Chapter 4 DesignerDME Designer Owner’s Manual240Slot ComponentIf an inserted I/O card is selected in the DME properties settings, it will be displaye

Chapter 4 DesignerDME Designer Owner’s Manual241 Slot Component PropertiesTo display the “Slot Component Properties” dialog box, select a Slot compo

Chapter 4 DesignerDME Designer Owner’s Manual242Launch ApplicationClick the radio button and select whether an application or file is to be linked to

Chapter 4 DesignerDME Designer Owner’s Manual243User ModuleA user module combines a number of other components into a module that is treated as a sin

Chapter 4 DesignerDME Designer Owner’s Manual244[Recall Component Library]Recalls a library into which component parameters have been saved. Click to

Chapter 4 DesignerDME Designer Owner’s Manual245 User Module PropertiesTo display the “User Module Properties” dialog box, select a user module obje

Chapter 4 DesignerDME Designer Owner’s Manual246Inputs/Outputs SetsSets the number of input/output ports. Enter a number into the [Inputs] box and [O

Chapter 4 DesignerDME Designer Owner’s Manual247PictureAn image can be arranged as an object on a sheet. This specifies a file for this purpose. You

Chapter 4 DesignerDME Designer Owner’s Manual248 Picture ObjectWhen you click a picture object that is located in each design window, handles (small

Chapter 4 DesignerDME Designer Owner’s Manual249 Picture Object PropertiesTo display the “Picture Properties” dialog box, select a picture object, t

Chapter 1 Before UsingDME Designer Owner’s Manual25Closing DME DesignerTo close DME Designer, click [Exit] on the [File] menu of the Main Panel windo

Chapter 4 DesignerDME Designer Owner’s Manual250[Select Component] ButtonSpecifies the component editor to be opened when a Picture object is double

Chapter 4 DesignerDME Designer Owner’s Manual251Tex t B oxText objects can be arranged in all design windows. Text is entered into the “Text Properti

Chapter 4 DesignerDME Designer Owner’s Manual252 Text Object PropertiesTo display the “Text Properties” dialog box, double-click on a text object, o

Chapter 4 DesignerDME Designer Owner’s Manual253Box (Rectangle)You can arrange rectangles on the sheet. If you click the box, handles (small squares)

Chapter 4 DesignerDME Designer Owner’s Manual254 Box Object PropertiesTo display the “Box Properties” dialog box, double-click on a box object or se

Chapter 4 DesignerDME Designer Owner’s Manual255Ellipse[Ellipse] in the Toolkit window places a elliptical shape on the sheet.When you click an Ellip

Chapter 4 DesignerDME Designer Owner’s Manual256 Ellipse Object PropertiesTo display the “Ellipse Properties” dialog box, double-click on an ellipse

Chapter 4 DesignerDME Designer Owner’s Manual257WireDraws lines (wires) for connecting components and creating shapes. For instructions on drawing wi

Chapter 4 DesignerDME Designer Owner’s Manual258[Wire Color]Specifies the wire color.[Properties]Displays the “Wire Properties” dialog box. Wire Obj

Chapter 4 DesignerDME Designer Owner’s Manual259 Wire Object PropertiesTo display the “Wire Properties” dialog box, double-click on a wire object. Y

DME Designer Owner’s Manual26Chapter 2 DME Designer OverviewNames and Functions of the WindowsThe DME Designer software has several windows, includin

Chapter 4 DesignerDME Designer Owner’s Manual260Legend (Descriptive Fields)Displays a legend for all sheets except the User Module window. When you c

Chapter 4 DesignerDME Designer Owner’s Manual261[Date] Box and [Revisions] BoxYou can enter up to five dates and five revisions. You can enter up to

Chapter 4 DesignerDME Designer Owner’s Manual262Sheet There is one sheet in each design window for arranging objects. The size of the sheet and its b

Chapter 4 DesignerDME Designer Owner’s Manual263Background EffectSets the background for the sheet. •[Color] ButtonSets the color of the background.

Chapter 4 DesignerDME Designer Owner’s Manual264“Select Font” Dialog BoxWhen you click the [Font] or [Label Font] button in an object’s properties di

Chapter 4 DesignerDME Designer Owner’s Manual265“Select Color” Dialog BoxWhen you click the [Color] or [Label Color] button in an object’s properties

Chapter 4 DesignerDME Designer Owner’s Manual2661 Click the [Custom colors] box where you will save the color you create. The box you clicked will be

Chapter 4 DesignerDME Designer Owner’s Manual267“Select Image” Dialog BoxYou can display an image for the background of sheets or objects. You can us

Chapter 4 DesignerDME Designer Owner’s Manual268Design Window Shared Settings and OperationsPreferencesYou can set the operating environment for the

Chapter 4 DesignerDME Designer Owner’s Manual269Crosshairs• [Show Crosshairs While Dragging]Place a checkmark here to have crosshairs displayed for g

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual27Designer WindowThe Designer window displays several different windows. First among them i

Chapter 4 DesignerDME Designer Owner’s Manual270GridDisplays a grid on the sheet in each design window to guide the placement of objects. You can als

Chapter 4 DesignerDME Designer Owner’s Manual271Exporting Each Design WindowInstead of saving projects in their entirety, you can output the informat

Chapter 4 DesignerDME Designer Owner’s Manual272“Export DXF” dialog box DXF File NameEnter a filename for the DXF file. The default file name entere

Chapter 4 DesignerDME Designer Owner’s Manual273 BlockSets the block form used in the sheet. Displays a list where you can select the form. [Block]M

Chapter 4 DesignerDME Designer Owner’s Manual274Printing Each Design WindowYou can print out the content of each design window just as it appears on

Chapter 4 DesignerDME Designer Owner’s Manual275 [“Print Preview” window]Displays a print preview of the active design window. You can check the app

Chapter 4 DesignerDME Designer Owner’s Manual276Device Group SelectionWhen laying out DME, SP2060, and ICP1 objects the “Device Group and Sampling Fr

Chapter 4 DesignerDME Designer Owner’s Manual277Selecting ObjectsObjects can be selected when the mouse cursor appears as crosshairs. Selecting with

Chapter 4 DesignerDME Designer Owner’s Manual278Changing the OrderObjects newly placed on the sheet will be displayed above any previously placed obj

Chapter 4 DesignerDME Designer Owner’s Manual279Drawing and Editing WiresWireObjects that are arranged on sheets in the Configuration or User Module

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual28 Zone WindowThe Zone window is used to design zones within the area. A zone is a more co

Chapter 4 DesignerDME Designer Owner’s Manual280Canceling Line Segment SelectionIf you select another object or an empty location on the sheet, it wi

Chapter 4 DesignerDME Designer Owner’s Manual281HotspotThe small white rectangles at the edge of objects are called “Hotspots.” Wires usually connect

Chapter 4 DesignerDME Designer Owner’s Manual282Drawing SettingsSeveral functions are available to help ensure accurate wire drawing. GridTo accurat

Chapter 4 DesignerDME Designer Owner’s Manual283 Connecting Hotspots with HotspotsMethod 1 ClickingClick the hotspot where the connection originates

Chapter 4 DesignerDME Designer Owner’s Manual284 Connect with Bent LineMethod 1 From Hotspot to HotspotClick the hotspot where the connection origin

Chapter 4 DesignerDME Designer Owner’s Manual285 Connect Multiple Hotspots in a Single OperationMethod 1 <Ctrl> Key CombinationsIf you hold do

Chapter 4 DesignerDME Designer Owner’s Manual286Press the [F5] key to connect the uppermost open hot spot to the right of the selected object and the

Chapter 4 DesignerDME Designer Owner’s Manual287 Starting Drawing from the End Point/Node/Line Segment of an Existing WireYou can draw from the end

Chapter 4 DesignerDME Designer Owner’s Manual288 Finishing DrawingWhen the hotspots or already drawn wires are connected, drawing is finished. To fi

Chapter 4 DesignerDME Designer Owner’s Manual289Moving Line SegmentsTo move a line segment, select the nodes on both sides of the segment, and drag o

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual29 Toolkit WindowThe Toolkit window displays the objects that you can use in each window t

Chapter 4 DesignerDME Designer Owner’s Manual290Show Unconnected NodeTurn [Show Unconnected Node] in the [Tools] menu ON to display unconnected nodes

Chapter 4 DesignerDME Designer Owner’s Manual291Adding, Deleting, and Renaming a ZoneAt least one zone is included within an area. In the default Are

Chapter 4 DesignerDME Designer Owner’s Manual292[Rename] ButtonChanges the name of the zone selected on the list. Clicking here displays the “Enter n

Chapter 4 DesignerDME Designer Owner’s Manual293Changing Device GroupsA zone can include up to 32 device groups, and all devices will belong to one o

Chapter 4 DesignerDME Designer Owner’s Manual294[Rename] ButtonRenames the device group currently selected in the list. The “Enter new name for curre

Chapter 4 DesignerDME Designer Owner’s Manual295Adding, Deleting, and Renaming a ConfigurationA device group will include at least one configuration,

Chapter 4 DesignerDME Designer Owner’s Manual296[Rename] ButtonChanges the name of the configuration selected on the list. Clicking here displays the

Chapter 4 DesignerDME Designer Owner’s Manual297Area WindowIn the Area window, the area is designed by arranging objects on a design sheet, When you

Chapter 4 DesignerDME Designer Owner’s Manual298Arranging ObjectsVarious types of objects can be placed in the window by dragging them from the Toolk

Chapter 4 DesignerDME Designer Owner’s Manual299 Title BarDisplays the zone name you have in the “Zone Manager” dialog box. There is always one zone

DME Designer Owner’s Manual3The DME Audio System NetworkIn an audio system including one or more DME units and/or SP2060 units, the “control space” is

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual30Component EditorThe blocks that are arranged in the configuration window are called “comp

Chapter 4 DesignerDME Designer Owner’s Manual300 Placing DME or SP2060In the Toolkit window [DME24N], [DME64N], [DME8i-C], [DME8o-C], [DME4io-C], [D

Chapter 4 DesignerDME Designer Owner’s Manual301Configuration WindowThe Configuration window is used for arranging components on the sheet and making

Chapter 4 DesignerDME Designer Owner’s Manual302Placing ComponentsYou can place objects by dragging them from the Toolkit window. You can also place

Chapter 4 DesignerDME Designer Owner’s Manual303 SP2060 Configuration Window[Input A/B Link] ButtonAlthough SP2060 configurations cannot be edited,

Chapter 4 DesignerDME Designer Owner’s Manual304The output port you clicked will be selected and monitoring will begin. If you click another output p

Chapter 4 DesignerDME Designer Owner’s Manual305Show Signal Delay (Delay Display Value)The signal delays according to the processing time in the audi

Chapter 4 DesignerDME Designer Owner’s Manual306Monitoring Point ListWhen you click [Monitoring Point List] in the [Tools] menu, the “Monitoring Poin

Chapter 4 DesignerDME Designer Owner’s Manual307 Monitoring Point ListDisplays and allows editing of monitoring point information. [No.]Displays the

Chapter 4 DesignerDME Designer Owner’s Manual308Analyze (Configuration Analysis)When you click the [Analyze] command on the [Tools] menu or the [Anal

Chapter 4 DesignerDME Designer Owner’s Manual309User ModuleUser ModulesA module treated as a single component that combines a number of other compone

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual31Users and SecurityYou can create multiple users in DME Designer and set the functions tha

Chapter 4 DesignerDME Designer Owner’s Manual3104 Here you can set object properties. [Inputs/Outputs Sets] is set to 1. Set the required number of p

Chapter 4 DesignerDME Designer Owner’s Manual311Save the User Module using the [Save User Module] command on the [Tools] menu. The [Save User Module]

Chapter 4 DesignerDME Designer Owner’s Manual312[Set Password] ButtonChanges the password. Clicking here displays the “Input Password” dialog box. En

Chapter 4 DesignerDME Designer Owner’s Manual313Editing User ModulesUser modules can be edited in the User Module window. Components layout and logic

Chapter 4 DesignerDME Designer Owner’s Manual314 Placing a Number of Components of the Same TypeYou can arrange a number of components of the same t

Chapter 4 DesignerDME Designer Owner’s Manual315 User Module SettingsDisplays the settings for the user module selected on the list. To change the s

Chapter 4 DesignerDME Designer Owner’s Manual316 [Export] ButtonSaves the user module data (component wiring/connection, library, and user module ed

Chapter 4 DesignerDME Designer Owner’s Manual317 Group/NameDisplays the pre-edit user module group name and user module name. User Module NameSpeci

Chapter 4 DesignerDME Designer Owner’s Manual318 Default LibrarySpecifies the library file to be imported when creating a user module from a templat

DME Designer Owner’s Manual319Chapter 5 Editor WindowComponent Editor WindowComponent parameters are edited in the component editor. The same compone

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual32Logging OnThe “Log On” dialog box is displayed whenever the application is started or a u

Chapter 5 ComponentsDME Designer Owner’s Manual320 Title BarDisplays the label. Label settings are made in the “Component Properties” dialog box. Fo

Chapter 5 ComponentsDME Designer Owner’s Manual321 KnobDrag to adjust the parameter.You can change the way knobs operate, using the [Component Edito

Chapter 5 ComponentsDME Designer Owner’s Manual322• Click here to execute a command. • Displays a menu.• Displays another window. Click this buttonto

Chapter 5 ComponentsDME Designer Owner’s Manual323 Edit BoxDisplays current values for settings. You can modify values by typing from the keyboard o

Chapter 5 ComponentsDME Designer Owner’s Manual324Changing Selections with the Key/Mouse WheelYou can modify values in selected edit boxes using the

Chapter 5 ComponentsDME Designer Owner’s Manual325User Control Editor/User Module EditorUser Control EditorThe user control function lets you lay out

Chapter 5 ComponentsDME Designer Owner’s Manual326 [User Control] MenuUser controls are displayed in the [View]  [User Control] submenu of the Main

Chapter 5 ComponentsDME Designer Owner’s Manual3274 Sets security for User Control. Different settings are provided for individual security levels an

Chapter 5 ComponentsDME Designer Owner’s Manual3286 Click the [OK] button in the “User Control Manager” dialog box. When a new user control is create

Chapter 5 ComponentsDME Designer Owner’s Manual329• To Change the Security levelClick the [Security Level] box of the User Control to be changed.The

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual33Logging OffLogoff is used when changing users. When you log off, the document currently b

Chapter 5 ComponentsDME Designer Owner’s Manual330 User Security SettingsIn the “Security” dialog box in the Main Panel window, you can set the user

Chapter 5 ComponentsDME Designer Owner’s Manual331Names and Functions Status BarThe lock icon will appear in the User Module when security is active

Chapter 5 ComponentsDME Designer Owner’s Manual332 Edit PaletteThe edit palette is automatically displayed whenever the user control editor/user mod

Chapter 5 ComponentsDME Designer Owner’s Manual333[Align To Top] ButtonAligns all selected controls with the top edge of the uppermost selected contr

Chapter 5 ComponentsDME Designer Owner’s Manual334 Grid SettingWhen arranging controls, you can align them along the grid. This menu sets the spacin

Chapter 5 ComponentsDME Designer Owner’s Manual335Window Size and Background SettingsThe size and background of the User Control Editor/User Module E

Chapter 5 ComponentsDME Designer Owner’s Manual336 [Image]Displays an image for the background. You can use image files in the following formats: BM

Chapter 5 ComponentsDME Designer Owner’s Manual337Placing ControlsControls can be placed when you are in the design mode. You can turn the design mod

Chapter 5 ComponentsDME Designer Owner’s Manual338 Placing Controls by Dragging Them (User Control Editor)You can drag the controls you want to copy

Chapter 5 ComponentsDME Designer Owner’s Manual339 Placing Controls by Dragging Them (User Module Editor)You can drag the controls you want to copy

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual34Files Used by the DME DESIGNERThe following files are used by the DME designer applicatio

Chapter 5 ComponentsDME Designer Owner’s Manual340 Placing Controls Using Copy and PasteCopy the controls in the component editor and paste in the u

Chapter 5 ComponentsDME Designer Owner’s Manual341 When You Cannot CopyRegardless of whether you drag or use copy and paste, you cannot create multi

Chapter 5 ComponentsDME Designer Owner’s Manual342Moving and Aligning ControlsIn the user control editor or user module editor, you can move or align

Chapter 5 ComponentsDME Designer Owner’s Manual343Cut/Copy/Paste ControlsYou can edit controls arranged in the user control editor or user module edi

Chapter 5 ComponentsDME Designer Owner’s Manual344Undo and Redo Commands During EditingThe [Undo] and [Redo] commands in the main panel window [Edit]

Chapter 5 ComponentsDME Designer Owner’s Manual345 “Slider Properties” Dialog BoxThe “Slider Properties” dialog box will appear when you either doub

Chapter 5 ComponentsDME Designer Owner’s Manual346 “Toggle Button Properties” Dialog BoxThe Toggle Button Properties dialog box will appear when you

Chapter 5 ComponentsDME Designer Owner’s Manual347 “Radio Button Properties” Dialog BoxThe Radio Button Properties dialog box will appear when you e

Chapter 5 ComponentsDME Designer Owner’s Manual348 Slider “Level Meter Properties” Dialog BoxThe “Level Meter Properties” dialog box will appear whe

Chapter 5 ComponentsDME Designer Owner’s Manual349 “Solid Frame Properties” Dialog BoxThe Solid Frame Properties dialog box will appear when you rig

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual35Saving Project FilesProject files are saved using the [File] menu  [Save] and [Save As]

Chapter 5 ComponentsDME Designer Owner’s Manual350 “Color Frame Properties” Dialog BoxThe Color Frame Properties dialog box will appear when you rig

Chapter 5 ComponentsDME Designer Owner’s Manual351 User Picture Properties Dialog BoxRight-click the image and select [Properties] from the contextu

Chapter 5 ComponentsDME Designer Owner’s Manual352 Text Properties Dialog BoxRight-click the text box and select [Properties] from the contextual me

Chapter 5 ComponentsDME Designer Owner’s Manual353 Box Properties Dialog BoxRight-click the box and select [Properties] from the contextual menu to

Chapter 5 ComponentsDME Designer Owner’s Manual354 Ellipse Properties Dialog BoxRight-click the ellipse and select [Properties] from the contextual

Chapter 5 ComponentsDME Designer Owner’s Manual355 “Line Properties” Dialog BoxDouble-click a line or right-click it and select [Properties] from th

Chapter 5 ComponentsDME Designer Owner’s Manual356 “Scene Recall Button Properties” Dialog BoxDouble-click a Scene Recall button or right-click it a

Chapter 5 ComponentsDME Designer Owner’s Manual357Changing the Tab OrderThe tab order for edit boxes is determined by the order in which they were pa

Chapter 5 ComponentsDME Designer Owner’s Manual358Operation Mode and Design ModeThere are two modes for the user control editor/user module editor an

Chapter 5 ComponentsDME Designer Owner’s Manual359Context MenuThe context menus that appear when you right-click in a window will differ in operation

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual367 [Save as type]Selects the format for the file you are saving. When saving project files

Chapter 5 ComponentsDME Designer Owner’s Manual360[Level Meter Enable]Specifies whether the level meters will be enabled or disabled.[Close All Edito

Chapter 5 ComponentsDME Designer Owner’s Manual361 The Context Menu Displayed in Design Mode When You Right-Click a Control[Open Original Component

Chapter 5 ComponentsDME Designer Owner’s Manual362SnapThe Snap function records parameters for the component editor, user control editor, and user mo

Chapter 5 ComponentsDME Designer Owner’s Manual363Recalling a Library1 Click the snap button that has recorded the parameter set. This turns it ON. 2

Chapter 5 ComponentsDME Designer Owner’s Manual364LibraryComponent editor, user control editor, and user module editor parameters can be saved as lib

Chapter 5 ComponentsDME Designer Owner’s Manual365 Library FilenamesBecause the library filenames are displayed in the [Recall Library] menu, use a

Chapter 5 ComponentsDME Designer Owner’s Manual366Recalling a LibraryThe recall function reads stored parameters into the component editor.  Editor

Chapter 5 ComponentsDME Designer Owner’s Manual367 Recalling a Library Stored in a Folder Other Than the Default Libraries not stored in the default

Chapter 5 ComponentsDME Designer Owner’s Manual368Creating Parameter LinksYou can group controls (parameters) and link their parameters. You can crea

Chapter 5 ComponentsDME Designer Owner’s Manual369Local Link The group names for local like groups are displayed in the [Local Link] submenu. When yo

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual37 Saving Project Files 1 Click [File] menu  [Save] in the Main Panel window.If there is

Chapter 5 ComponentsDME Designer Owner’s Manual370Creating Component LinksThe same types of parameters can be linked between the same types of compon

DME Designer Owner’s Manual371Chapter 6 Component GuideTypes of ComponentsComponent GroupsWhen the Configuration window and User Module window are ma

Chapter 6 Component GuideDME Designer Owner’s Manual372In the Designer window [Tools] menu  [Component List] menu, component groups are displayed as

Chapter 6 Component GuideDME Designer Owner’s Manual373Crossover Processor II 4 Way5 Way6 WayDelay Long 1 Output(*)2 Output3 Output

Chapter 6 Component GuideDME Designer Owner’s Manual374EQ GEQ Mono 7 Band15 Band31 BandStereo 7 Band15 Band31 BandPEQ Mono 2 Band

Chapter 6 Component GuideDME Designer Owner’s Manual375Meter 1 Channel2 Channel4 Channel8 Channel12 Channel16 ChannelMiscellaneous

Chapter 6 Component GuideDME Designer Owner’s Manual376Mixer Matrix Mixer 8 Input 32 Output12 Input 1 Output2 Output4 Output8 Output12

Chapter 6 Component GuideDME Designer Owner’s Manual377Room Combiner Mono 4 Room8 Room12 Room16 RoomStereo 4 Room8 Room12 Room16

Chapter 6 Component GuideDME Designer Owner’s Manual378(*) Parameter edit onlySource Selector 3 Position 1 Channel(*)4 Position 1 Channel2 Cha

Chapter 6 Component GuideDME Designer Owner’s Manual379Ambient Noise CompensatorThe Ambient Noise Compensator automatically adjusts program source le

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual38 Protecting a Project File with a PasswordWhen you save a project file with a new name,

Chapter 6 Component GuideDME Designer Owner’s Manual380)Bypass ON/OFF Turns compensation on or off.!Level Meter Displays the program source output le

Chapter 6 Component GuideDME Designer Owner’s Manual381Audio DetectorThe Audio Detector detects the presence of an audio signal and can light an indi

Chapter 6 Component GuideDME Designer Owner’s Manual382Auto Gain ControlThe Auto Gain Control component automatically adjusts gain in response to inp

Chapter 6 Component GuideDME Designer Owner’s Manual383CrossoverSeparates input signals into multiple frequency channels and outputs them. The follow

Chapter 6 Component GuideDME Designer Owner’s Manual384The number of output channels varies according to the component variation.Set the attenuation

Chapter 6 Component GuideDME Designer Owner’s Manual385 Graphic Control PointsThe graph control points show [Output Level] and [Frequency]. As you m

Chapter 6 Component GuideDME Designer Owner’s Manual386 LFP/HPF[Type] sets the attenuation slope and the filter type for the LPF and HPF. The select

Chapter 6 Component GuideDME Designer Owner’s Manual387Crossover ProcessorA crossover processor consists of a crossover, delay, parametric equalizer,

Chapter 6 Component GuideDME Designer Owner’s Manual388The output number varies according to the component variation.Set the attenuation curve for th

Chapter 6 Component GuideDME Designer Owner’s Manual389Name Function1Crossover Curve Displays the level of each frequency channel, distinguished by c

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual39Opening Project FilesProject files are opened using the [File] menu  [Open] command in t

Chapter 6 Component GuideDME Designer Owner’s Manual390 DelayWhen you click the [Delay] button for the crossover processor, it opens the delay edito

Chapter 6 Component GuideDME Designer Owner’s Manual391 Parametric EqualizerWhen you click [PEQ] button for the crossover processor, it opens the pa

Chapter 6 Component GuideDME Designer Owner’s Manual392 CompressorWhen you click the [Compressor] button for the crossover processor, it opens the c

Chapter 6 Component GuideDME Designer Owner’s Manual393Crossover Processor IIThe following five types of components are available in the Crossover Pr

Chapter 6 Component GuideDME Designer Owner’s Manual394 CrossoverWhen you click the [Crossover] button for the crossover processor, it opens the cro

Chapter 6 Component GuideDME Designer Owner’s Manual395Section Parameter Setting Range Function5LPF Type Thru6 dB/Oct12 dB/Oct AdjustGc12 dB/Oct Butr

Chapter 6 Component GuideDME Designer Owner’s Manual396 DelayWhen you click the [Delay] button for the crossover processor, it opens the delay edito

Chapter 6 Component GuideDME Designer Owner’s Manual397 Parametric EqualizerWhen you click the [PEQ] button for the crossover processor, it opens th

Chapter 6 Component GuideDME Designer Owner’s Manual398 CompressorWhen you click the [Compressor] button for the crossover processor, it opens the c

Chapter 6 Component GuideDME Designer Owner’s Manual399DelayThis is a multi-tap delay that provides independent delay and level control for each outp

DME Designer Owner’s Manual4The DME Designer Software ApplicationThe DME Designer software application provides a convenient, central interface for th

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual40 Opening a Project File That Has Security SetIf security is set for a project, the “Ente

Chapter 6 Component GuideDME Designer Owner’s Manual400Delay ShortDelay short components are available with from one to eight outputs. Each has a sin

Chapter 6 Component GuideDME Designer Owner’s Manual4014Delay Tap Delay ms: 0 to 130Sample: the range depends on the Fs value.Meter: 0 to 44.7Feet: 0

Chapter 6 Component GuideDME Designer Owner’s Manual402DynamicsComponents in the dynamic group adjust the dynamic range of the sound. There are eight

Chapter 6 Component GuideDME Designer Owner’s Manual403CompanderThe compander combines the effects of a compressor and an expander. A compressor comp

Chapter 6 Component GuideDME Designer Owner’s Manual404CompressorCompresses signals that exceed a threshold. Narrows the dynamic range of the signal,

Chapter 6 Component GuideDME Designer Owner’s Manual405De-EsserCompresses the signal above a specified frequency. The de-esser controls sibilant (his

Chapter 6 Component GuideDME Designer Owner’s Manual406Double-click a component to open the component editor for it. The parameters are the same for

Chapter 6 Component GuideDME Designer Owner’s Manual407DuckingAttenuates the output a particular amount, when an input signal exceeds its threshold.

Chapter 6 Component GuideDME Designer Owner’s Manual408ExpanderWidens the dynamic range of the signal. Low-level signals such as noise are diminished

Chapter 6 Component GuideDME Designer Owner’s Manual409GateAttenuates signals that are lower than the threshold level. Both mono channel and stereo c

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual41 Double-Click the Icon for the Project FileWhen you double-click the icon for the projec

Chapter 6 Component GuideDME Designer Owner’s Manual410LimiterSignals above the threshold are compressed at an ∞:1 ratio, preventing output of signal

Chapter 6 Component GuideDME Designer Owner’s Manual411Double click the component to open the component editor. Mono channel and stereo channel compo

Chapter 6 Component GuideDME Designer Owner’s Manual412Program DuckerWhen the key-in signal level exceeds the threshold level, the output signal is a

Chapter 6 Component GuideDME Designer Owner’s Manual4138Range -∞ – 10.0 s Sets the attenuation level: the attenuation level while a key-in signal is

Chapter 6 Component GuideDME Designer Owner’s Manual414Equalizer (EQ)The equalizer boosts or cuts the levels of specified frequencies. The EQ group c

Chapter 6 Component GuideDME Designer Owner’s Manual415 EQ Graph [Bypass] ButtonA number for each frequency band is displayed on these buttons. When

Chapter 6 Component GuideDME Designer Owner’s Manual416Parametric Equalizer (PEQ)Boosts or cuts signals within specified frequencies. In both the Mon

Chapter 6 Component GuideDME Designer Owner’s Manual417 Filter TypeVarious types of curves are available for changing the level. Click the [Type] bu

Chapter 6 Component GuideDME Designer Owner’s Manual418FaderControls the output level for each channel. Fader components are available for 1, 2, 4, 8

Chapter 6 Component GuideDME Designer Owner’s Manual419Feedback SuppressorThe Feedback Suppressor effectively suppresses acoustic feedback.Parameter

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual42DME Data ImportThis imports DME data file settings into a DME or SP2060 included in the c

Chapter 6 Component GuideDME Designer Owner’s Manual420FiltersA filter passes specific frequencies and attenuates all others. There are seven types o

Chapter 6 Component GuideDME Designer Owner’s Manual421High Pass Filter (HPF)The high pass filter passes frequencies in the signal that are higher th

Chapter 6 Component GuideDME Designer Owner’s Manual422Low Pass Filter (LPF)The low pass filter passes frequencies in the signal that are lower than

Chapter 6 Component GuideDME Designer Owner’s Manual423Notch Filter (Notch)The notch filter attenuates the signal within a specified frequency band,

Chapter 6 Component GuideDME Designer Owner’s Manual424Programmable BPFThe band pass filter passes the signal from a specified frequency band, while

Chapter 6 Component GuideDME Designer Owner’s Manual4257LPF Frequency 20 Hz to 20 kHz Sets the LPF cutoff frequency. 8Type Thru6 dB/Oct12 dB/Oct Adju

Chapter 6 Component GuideDME Designer Owner’s Manual426Programmable HPFThe high pass filter passes frequencies in the signal that are higher the spec

Chapter 6 Component GuideDME Designer Owner’s Manual427Programmable LPFThe low pass filter passes frequencies in the signal that are lower than the s

Chapter 6 Component GuideDME Designer Owner’s Manual428MeterDisplays signal levels. Meter components are available with 1, 2, 4, 8, 12, and 16 channe

Chapter 6 Component GuideDME Designer Owner’s Manual429MiscellaneousIn the Miscellaneous group, there are the Oscillator subgroup and the Wav File Pl

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual43 [Import Device Configuration] SubmenuThe device groups included in the current configur

Chapter 6 Component GuideDME Designer Owner’s Manual430Wav File PlayerThe Wav File Player is a component for playing Wave files. Only one Wav File Pl

Chapter 6 Component GuideDME Designer Owner’s Manual431MixerThe Mixer group contains the Auto Mixer, Auto Mixer II, Delay Matrix, Matrix Mixer, and S

Chapter 6 Component GuideDME Designer Owner’s Manual432*1 The amount of gain compensation varies according to the number of input channels with open

Chapter 6 Component GuideDME Designer Owner’s Manual433Auto Mixer IIThis component detects the presence of signals at the input channels, and automat

Chapter 6 Component GuideDME Designer Owner’s Manual434*1 The amount of gain compensation varies according to the number of channels for which input

Chapter 6 Component GuideDME Designer Owner’s Manual435Delay MatrixThis is a matrix mixer that allows you to set an independent delay time and level

Chapter 6 Component GuideDME Designer Owner’s Manual436 Matrix (Delay Meter/Output Level Meter)The upper row has delay meters, while the middle row

Chapter 6 Component GuideDME Designer Owner’s Manual437 Input MasterIf you click the [Input Master] button in the delay matrix component editor, it

Chapter 6 Component GuideDME Designer Owner’s Manual438 All Inputs to One OutputWhen you click the output channel number on the matrix, the [Delay M

Chapter 6 Component GuideDME Designer Owner’s Manual439Output Channel SwitchingThe [Delay Matrix - All Inputs to One Output] editor window displays t

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual44DME Data ExportThis exports parameters from a DME or SP2060 included in the current confi

Chapter 6 Component GuideDME Designer Owner’s Manual440Input Channel SwitchingThe [Delay Matrix - One Input to All Outputs] editor window displays th

Chapter 6 Component GuideDME Designer Owner’s Manual441 CrosspointIf you click a level meter in the delay matrix component editor, that group's

Chapter 6 Component GuideDME Designer Owner’s Manual442Channel Group SwitchingThe [Delay Matrix - Crosspoint] editor window displays four channels ea

Chapter 6 Component GuideDME Designer Owner’s Manual443Double-click a component to display the component editor for it. The number of input and outpu

Chapter 6 Component GuideDME Designer Owner’s Manual444 Matrix (Output Level)In the matrix, you can view send levels from all output channels to out

Chapter 6 Component GuideDME Designer Owner’s Manual445 Input MasterIf you click the [Input Master] button in the matrix mixer component editor, it

Chapter 6 Component GuideDME Designer Owner’s Manual446 All Inputs to One OutputWhen you click the output channel number on the matrix, the [Matrix

Chapter 6 Component GuideDME Designer Owner’s Manual447Output Channel Switching[Matrix Mixer - All Inputs to One Output] editor window displays the o

Chapter 6 Component GuideDME Designer Owner’s Manual448Input Channel SwitchingThe [Matrix Mixer - One Input to All Outputs] editor window displays th

Chapter 6 Component GuideDME Designer Owner’s Manual449 CrosspointIf you click a level meter in the matrix mixer component editor, the output crossp

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual45 [Export Device Configuration] SubmenuThe DMEs or SP2060s included in the current config

Chapter 6 Component GuideDME Designer Owner’s Manual450Channel Group SwitchingThe [Matrix Mixer - Crosspoint] editor window displays four channels ea

Chapter 6 Component GuideDME Designer Owner’s Manual451Double-click the component to open the component editor. The component editor is the same for

Chapter 6 Component GuideDME Designer Owner’s Manual452 EQ Editor WindowClick the Simple Mixer EQ Details [EQ] button to open the EQ editor window v

Chapter 6 Component GuideDME Designer Owner’s Manual453PanThe Pan group contains the following subgroups: LCR, LR, and Surround. Pan Nominal Positio

Chapter 6 Component GuideDME Designer Owner’s Manual454LRSeparates a single input into left and right outputs. Components are available with 1, 2, 4,

Chapter 6 Component GuideDME Designer Owner’s Manual455SurroundThere are three types of surround pan components in the Surround subgroup: 3-1, 5.1, a

Chapter 6 Component GuideDME Designer Owner’s Manual456DraggingYou can move the control by dragging it with the mouse. ClickIf you click within the g

Chapter 6 Component GuideDME Designer Owner’s Manual457 Surround 3-1Surround 3-1 has four channel surround pan, with three channels in front, and on

Chapter 6 Component GuideDME Designer Owner’s Manual458 Surround 5.1 Surround 5.1 has surround pan with three channels in front, two in the rear, an

Chapter 6 Component GuideDME Designer Owner’s Manual459 Surround 6.1 Surround 6.1 has surround pan with three channels in front, three in the rear,

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual46Importing DME Designer All Files1 Click [Import DME Designer All File] in the Main Panel

Chapter 6 Component GuideDME Designer Owner’s Manual460Room CombinerThe Room Combiner component is for use in facilities where movable partitions all

Chapter 6 Component GuideDME Designer Owner’s Manual461RouterThe router assigns inputs to outputs. Each of the six router groups has a different numb

Chapter 6 Component GuideDME Designer Owner’s Manual462 Routing SettingsTo change an assignment, click at the position where the desired input and o

Chapter 6 Component GuideDME Designer Owner’s Manual463Source SelectorThis component selects a single input source from multiple input sources.“Posit

Chapter 6 Component GuideDME Designer Owner’s Manual464Speaker ProcessorThe Speaker Processor is a crossover processor that includes APF (All Pass Fi

Chapter 6 Component GuideDME Designer Owner’s Manual465Different numbers of channels are provided by each component variation.Each frequency band has

Chapter 6 Component GuideDME Designer Owner’s Manual466 Graph Control PointsThe crossover level control points indicate [Output Level] and [Frequenc

Chapter 6 Component GuideDME Designer Owner’s Manual467 CrossoverClick the Speaker Processor [Crossover] button to open the crossover editor window.

Chapter 6 Component GuideDME Designer Owner’s Manual468 DelayClick the Speaker Processor [Delay] button to open the window. Delay can be set indepen

Chapter 6 Component GuideDME Designer Owner’s Manual469 Parametric EqualizerClick the Crossover Processor [PEQ] button to open the window. Parametri

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual475 The “Save Project File in DME Designer All File” dialog box will appear, allowing you t

Chapter 6 Component GuideDME Designer Owner’s Manual470 LimiterClick the Speaker Processor [Limiter] button to open the window. Limiter settings are

Chapter 6 Component GuideDME Designer Owner’s Manual471SPXSPX is an effect component that supports many different effect applications, such as reverb

Chapter 6 Component GuideDME Designer Owner’s Manual472Other effect parameters vary according to the selected effect type, as shown below. Effect Typ

Chapter 6 Component GuideDME Designer Owner’s Manual473Stereo DelayTwo input, two output basic stereo delay.Delay L 0.0 to 1350.0 ms Left channel del

Chapter 6 Component GuideDME Designer Owner’s Manual474ChorusTwo input, two output chorus effect.Freq. 0.05 to 40.00 Hz Modulation speedAM.Depth 0 to

Chapter 6 Component GuideDME Designer Owner’s Manual475TremoloTwo input, two output tremolo effect.Freq. 0.05 to 40.00 Hz Modulation speedDepth 0 to

Chapter 6 Component GuideDME Designer Owner’s Manual476Amp SimulateOne input, two output guitar amp simulator.AMP.Type STK-M1, STK-M2, THRASH, MIDBST

Chapter 6 Component GuideDME Designer Owner’s Manual477Rev+ChorusOne input, two output reverb and chorus effects in parallel.Rev Time 0.3 to 99.0 s R

Chapter 6 Component GuideDME Designer Owner’s Manual478Rev+Sympho.One input, two output reverb and symphonic effects in parallel.Rev Time 0.3 to 99.0

Chapter 6 Component GuideDME Designer Owner’s Manual479Delay->ER.One input, two output delay and early reflections effects in series.Delay L 0.0 t

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual48Exporting DME Designer All Files1 Click [Export DME Designer All File] in the Main Panel

Chapter 6 Component GuideDME Designer Owner’s Manual480Dist->DelayOne input, two output distortion and delay effects in series.DST.Type DST1, DST2

Chapter 6 Component GuideDME Designer Owner’s Manual481M.Band Dyna.Two input, two output 3-band dynamics processor, with individual solo and gain red

Chapter 6 Component GuideDME Designer Owner’s Manual482AEC – Acoustic Echo Canceller (MY4-AEC card required)This component is only available when an

Chapter 6 Component GuideDME Designer Owner’s Manual483MY4-AEC Signal FlowThe local and remote locations in a teleconferencing system are referred to

Chapter 6 Component GuideDME Designer Owner’s Manual484 AEC Component EditorThe AEC component editor includes meters that aid in setting optimum mic

Chapter 6 Component GuideDME Designer Owner’s Manual485Name Function1Mic In. meters These meters display the signal levels from the corresponding nea

Chapter 6 Component GuideDME Designer Owner’s Manual486 Advanced Settings Editor WindowClick the [Advanced] button in the AEC component editor windo

Chapter 6 Component GuideDME Designer Owner’s Manual487Slot Slot InThe Slot In Component only has outputs. 4, 8, and 16 channel types are provided.E

Chapter 6 Component GuideDME Designer Owner’s Manual488 Slot OutThe Slot Out component has only an input. There are three types of Slot In component

Chapter 6 Component GuideDME Designer Owner’s Manual489Cascade (DME64N only)Up to eight DME64N units can be cascade connected to provide bus sharing

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual49Configuration Creation ProcedureThe configuration is a design diagram that determines the

Chapter 6 Component GuideDME Designer Owner’s Manual490 Cascade OutPorts output to the CASCADE bus are assigned to the Cascade Out component. Make c

Chapter 6 Component GuideDME Designer Owner’s Manual491The following diagram shows an example in which three DME64N units are cascaded. Signal transm

Chapter 6 Component GuideDME Designer Owner’s Manual492Analog Input and OutputIn the DME24N/DME Satellite configuration window, there are [Analog Inp

Chapter 6 Component GuideDME Designer Owner’s Manual493 Analog OutputDouble-click [Analog Output] to display the component editor for it. The displa

Chapter 6 Component GuideDME Designer Owner’s Manual494SP2060 Input and OutputThe SP2060 configuration window includes [SP2060 Input] and [SP2060 Out

Chapter 6 Component GuideDME Designer Owner’s Manual495CobraNet Input and OutputThe DME8i-C/DME8o-C/DME4io-C configuration window includes [CobraNet

Chapter 6 Component GuideDME Designer Owner’s Manual496“Advanced Settings” Window(*1) Fewer channels may be available, depending on the settings. Ref

Chapter 6 Component GuideDME Designer Owner’s Manual497EtherSound Input and OutputThe DME8i-ES/DME8o-ES/DME4io-ES configuration window includes [Ethe

Chapter 6 Component GuideDME Designer Owner’s Manual498MY-CardThis shows the input and output for the card inserted into the DME expansion slot. The

Chapter 6 Component GuideDME Designer Owner’s Manual499 MY8-AE96SRight-click the block and select [Open MY-Card Editor] from the context menu to dis

DME Designer Owner’s Manual5 ScenesA Configuration and its Preset Parameters are a “Scene”.DME settings as well as Configuration and Preset Parameter

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual50OnlineYou can connect the DME or SP2060 unit to your computer and transfer configurations

Chapter 6 Component GuideDME Designer Owner’s Manual500 MY16-CRight-click the block and select [Open MY-Card Editor] from the context menu to displa

Chapter 6 Component GuideDME Designer Owner’s Manual501 MY16-CIIRight-click the block and select [Open MY-Card Editor] from the context menu to disp

Chapter 6 Component GuideDME Designer Owner’s Manual502 MY4-AECThis editor will appear when you click [Open MY-Card Editor] in the contextual menu t

Chapter 6 Component GuideDME Designer Owner’s Manual503Remote Controlled Head AmpThere are AD824 and AD8HR components arranged in the zone window. 

Chapter 6 Component GuideDME Designer Owner’s Manual504 AD8HRControls the Yamaha A/D converter AD8HR. The AD8HR is an eight channel analog to digita

Chapter 6 Component GuideDME Designer Owner’s Manual505Component GlossaryAdjustable Gc (AdjustGc)One type of filter characteristic. With this setting

Chapter 6 Component GuideDME Designer Owner’s Manual506FadeSets the action of the fader when there is a large change in its position during scene rec

Chapter 6 Component GuideDME Designer Owner’s Manual507Linkwitz-Riley (Linkwitz)One type of filter characteristics. As second-order filters, the sum

Chapter 6 Component GuideDME Designer Owner’s Manual508Release (Release Time)Sets the time period until gain returns to normal after a trigger signal

DME Designer Owner’s Manual509AppendixOptionsThe ICP1, CP4SW, CP1SF, and CP4SF controllers are optionally available for remote external control of the

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual516 Recalling Scenes.When going online, the scene will be recalled. Its scene number must b

AppendixDME Designer Owner’s Manual5105 [F5] KeyWhen the Main display is showing this button calls the Parameter Edit display for the middle User Defi

AppendixDME Designer Owner’s Manual511Main DisplayThe Main display will appear in a few seconds after the power is turned on. The Main display shows i

AppendixDME Designer Owner’s Manual512Parameter Edit DisplaysParameter Edit displays will appear when the [SCENE], [F6/MUTE] or other key is pressed t

AppendixDME Designer Owner’s Manual5132. Rotate the dial to edit the value as required.3. Repeat step 1 to select the next value to be edited, use the

AppendixDME Designer Owner’s Manual514ON/OFF ParametersParameters that are either ON or OFF are edited via this type of display (e.g., Mute Parameter

AppendixDME Designer Owner’s Manual515Scene RecallThis procedure recalls a new scene (refer to page 512).1. Press the [SCENE] button.The Scene Recall

AppendixDME Designer Owner’s Manual516Utility DisplaysMost basic ICP1 functions can be accessed via the Utility Display.Items accessible via the Utili

AppendixDME Designer Owner’s Manual517Utility Display OperationThe general procedure for operating the Utility displays is outlined below.1. Press the

AppendixDME Designer Owner’s Manual518Display Setup (Disp) PageProvides access to a number of display parameters.1 LCD ContrastThe current LCD contras

AppendixDME Designer Owner’s Manual5192 Panel Lock BootDetermines whether or not panel lock will be on when power to the device is turned on. This par

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual529 IP Address SelectionThe DMEs and SP2060s included in the current device group are displ

AppendixDME Designer Owner’s Manual520Initializing the ICP1Follow the steps below to initialize the internal memory.1. Turn off the power to the ICP1.

DME Designer Owner’s Manual521TroubleshootingFor the latest information about DME Designer, visit the Yamaha pro audio site at http://www.yamahaproaud

DME Designer Owner’s Manual522IndexAAD824 ... 230, 503AD8HR ...

IndexDME Designer Owner’s Manual523F[F1] Button (ICP1) ... 509[F2] Button (ICPI)

IndexDME Designer Owner’s Manual524Panel Lock Boot ... 519Panel Lock Icon ...

IndexDME Designer Owner’s Manual525[Window] menu ... 69, 209Window sizechanging ...

C.S.G., PA Development Division© 2004 – 2013 Yamaha CorporationMW K0

Chapter 2 DME Designer OverviewDME Designer Owner’s Manual53When going online is finished, the [Go On-line] button will be grayed out, and the Main P

DME Designer Owner’s Manual54Chapter 3 Main Panel WindowNames and Functions of the WindowsThe Main Panel window is the main window of DME Designer.Ti

Chapter 3 Main Panel WindowDME Designer Owner’s Manual55 [Save File] ButtonSaves the project file currently being edited.  [Save] on the [File] men

Chapter 3 Main Panel WindowDME Designer Owner’s Manual56Tool Button (Large) [Show/Hide Designer] ButtonDisplays or hides the Designer window. [Show

Chapter 3 Main Panel WindowDME Designer Owner’s Manual57Current SceneDisplays information about the current scene. You can switch between scenes. [C

Chapter 3 Main Panel WindowDME Designer Owner’s Manual58[User] (Logged On User) Currently Logged On User NameDisplays the currently logged on user n

Chapter 3 Main Panel WindowDME Designer Owner’s Manual59 Communication StatusDisplays the status of communication between the group master of the cu

DME Designer Owner’s Manual6Data Handled by a DME Audio System DME Data Structure* Some settings not included.Common Overall DataScene Link Settings

Chapter 3 Main Panel WindowDME Designer Owner’s Manual60Main Panel Window Menu[File] Menu [New]Creates a new project. When a new project is created,

Chapter 3 Main Panel WindowDME Designer Owner’s Manual61 [Open] Opens saved project files. Because the currently open project will be closed, a conf

Chapter 3 Main Panel WindowDME Designer Owner’s Manual62 [Export Device Configuration]Exports parameters of a device that is arranged in a configura

Chapter 3 Main Panel WindowDME Designer Owner’s Manual63[Edit] Menu [Undo]Undoes a single operation. The name of the operation that will be undone b

Chapter 3 Main Panel WindowDME Designer Owner’s Manual64[View] Menu [Designer]Displays or hides the Designer window. [Event Logger]Displays the net

Chapter 3 Main Panel WindowDME Designer Owner’s Manual65[Tools] Menu [Scene Manager]Opens the “Scene Manager” dialog box. See “Scene Manager” on pa

Chapter 3 Main Panel WindowDME Designer Owner’s Manual66 [MIDI]Opens the “MIDI” dialog box. See “MIDI” on page 125. [User Defined Button]Opens the

Chapter 3 Main Panel WindowDME Designer Owner’s Manual67[Setup] Menu [Communication Port]Opens the “Communication Port” dialog box.See “Communicat

Chapter 3 Main Panel WindowDME Designer Owner’s Manual68 [Monitor Out]Opens the “Monitor Out” dialog box. See “Monitor Out” on page 179. [Clock]Op

Chapter 3 Main Panel WindowDME Designer Owner’s Manual69[Window] MenuDisplays the open windows. Click a window name to bring that window to the front

DME Designer Owner’s Manual7 SP2060 Data StructureCommon Overall DataScene Link Settings Settings required for linked scene operation between multipl

Chapter 3 Main Panel WindowDME Designer Owner’s Manual70DME File StorageAllows management of DME files. Project files can be managed on the DME, elim

Chapter 3 Main Panel WindowDME Designer Owner’s Manual71Replacing the DME64N/24N startup screenThe screen image appearing when the DME64N/24N starts

Chapter 3 Main Panel WindowDME Designer Owner’s Manual72PreferencesWhen you click the [Preferences] command on the [File] menu in the Main Panel wind

Chapter 3 Main Panel WindowDME Designer Owner’s Manual73Auto SaveSet up the automatic file save feature.This setting has no effect when the file bein

Chapter 3 Main Panel WindowDME Designer Owner’s Manual74Slider ModeSets the action that occurs when you click on the scale located under the sliders.

Chapter 3 Main Panel WindowDME Designer Owner’s Manual75Event LoggerClick [Event Logger] in the [View] menu to open the “Event Logger” window. This w

Chapter 3 Main Panel WindowDME Designer Owner’s Manual76 DME List•[Date]Displays the date the event occurred. (Example Display: 2004-08-24)•[Time]Di

Chapter 3 Main Panel WindowDME Designer Owner’s Manual77“Log Setup” dialog box Click the [Log Setup] button in the “Event Logger” window to display t

Chapter 3 Main Panel WindowDME Designer Owner’s Manual78 [OK] ButtonApplies any setting changes and closes the window. [Cancel] ButtonCloses the wi

Chapter 3 Main Panel WindowDME Designer Owner’s Manual79“Event Log List” Dialog BoxClick the [Log List] button in the “Log Setup” dialog box to open

DME Designer Owner’s Manual8One DME unit/Device GroupNo.001002003004005006...ConfigurationOutput Processor for DomeOutput Processor for DomeOutput Pr

Chapter 3 Main Panel WindowDME Designer Owner’s Manual80Event Log ListThe event logs that can be retrieved from the DME unit as well as their content

Chapter 3 Main Panel WindowDME Designer Owner’s Manual81Displayed Messages Contents/CountermeasuresCommunication between DME is busy and load is appl

Chapter 3 Main Panel WindowDME Designer Owner’s Manual82Scene ManagerScenesConfiguration contents can be given a name and saved as “Scenes.” Saving s

Chapter 3 Main Panel WindowDME Designer Owner’s Manual83Names and Functions  DME Group/SP2060 SelectionSelects a DME group or SP2060. ListDisplays

Chapter 3 Main Panel WindowDME Designer Owner’s Manual84ConfigurationDisplays the configuration name. If the scene has not been stored, a hyphen (-)

Chapter 3 Main Panel WindowDME Designer Owner’s Manual85Fade TimeSets the fade time: i.e. the time it will take fader parameters to reach their new s

Chapter 3 Main Panel WindowDME Designer Owner’s Manual86 [Clear] ButtonDeletes the contents of the scene selected on the list. The button will be gr

Chapter 3 Main Panel WindowDME Designer Owner’s Manual87• Component TreeDisplays all components included in the scene. Check the checkboxes to the le

Chapter 3 Main Panel WindowDME Designer Owner’s Manual88Click the [Add] button to create a new set with all components selected.Click the [Delete] bu

Chapter 3 Main Panel WindowDME Designer Owner’s Manual89 [Store] ButtonStores the contents of the current configuration into the scene selected in t

DME Designer Owner’s Manual9NOTESeparate SP2060 units normally handle scenes independently, but the Scene Link function can be set from the DME Design

Chapter 3 Main Panel WindowDME Designer Owner’s Manual90 Preset parameters ListDisplays the preset parameters for each DME unit in the scene selecte

Chapter 3 Main Panel WindowDME Designer Owner’s Manual91User ControlUser ControlsYou can create an original control by arranging knobs and sliders in

Chapter 3 Main Panel WindowDME Designer Owner’s Manual92 NameDisplays the names of the user controls. Clicking here will select the characters in th

Chapter 3 Main Panel WindowDME Designer Owner’s Manual93 [New] ButtonCreates new user controls. Clicking here displays the “New User Control” dialog

Chapter 3 Main Panel WindowDME Designer Owner’s Manual94Parameter LinkAbout Parameter LinksYou can group parameters of the same type and link them. T

Chapter 3 Main Panel WindowDME Designer Owner’s Manual95• Local LinkLinks to the parameters of one DME unit.• Component LinkLinks component parameter

Chapter 3 Main Panel WindowDME Designer Owner’s Manual96• Keep OffsetClick to urn ON or OFF. When “ON” the parameter offset is maintained so that whe

Chapter 3 Main Panel WindowDME Designer Owner’s Manual97Synchronization (DME Designer and Unit Synchronization)The DME or SP2060 unit and DME Designe

Chapter 3 Main Panel WindowDME Designer Owner’s Manual98“Synchronization” Dialog BoxWhen you click the [Synchronization] command on the [Tools] menu,

Chapter 3 Main Panel WindowDME Designer Owner’s Manual99 [Group] ListAllows selection of a device group to be synchronized. [Go On-line] ButtonThis