Yamaha V3 Betriebsanweisung PDF herunterladen (Seite 8)

R Remote Version 3 User’s Guide 8

REDUNDANT

(4 down)

・START UP MODE

Settings

Switch

NORMAL

(Start up normally with the settings of the previous start-up.)

(7 and 8 up)

INITIALIZE

(The unit starts up with the internal memory initialized.

Initialization creates the following settings.

・SLOT 1-4 SRC (OFF)

・WORD CLOCK SELECT (DANTE/48kHz)

・USER PATTERN (Same routing configuration as the preset

PATTERN # 1)

・STATIC IP (Manual) (0.0.0.0)

・PANEL LOCK (Unlock)

・Dante PATCH (All OFF)

・Dante DEVICE LABEL (Y001-Yamaha -RSio64-D-123456)

(*1))

(7 down, 8 up)

(*1) The third and fourth characters of the Dante device label depend on device setting DIP switch

1 and the SETUP [UNIT ID] rotary switch. The lower six digits depend on the lower six digits of

the unit’s MAC address.

For RMio64-D

When using R Remote to operate an RMio64-D unit, set the DIP switches and [UNIT ID] rotary switch

of the unit, taking note of the following settings.

Set the DIP switches to the following setting.

・SECONDARY PORT

Settings

Switch

DAISY CHAIN

(1 up)

REDUNDANT

(1 down)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

Keine Kommentare

Yamaha V3 Betriebsanweisung Seite 8