Yamaha RX-V1900 Bedienungshandbuch PDF herunterladen (Seite 86)

82 En

Customizing this unit (MANUAL SETUP)

Input/output assignment

I/O ASSIGNMENT

Use this feature to assign the input/output jacks according

to the component to be used if the initial settings of this

unit do not correspond to your needs. Change the

parameter to reassign the respective jacks and effectively

connect more components.

Once the input/output jacks are reassigned, you can select

the corresponding component by using the

INPUT

selector (or the input selector buttons (3)).

• “NONE” appears in the OSD when no input source is assigned

to the jack.

• You cannot select a specific item more than once for the same

type of jack.

• An asterisk (*) appears to the right of the jack names that have

been changed from their previous settings.

• The input source currently assigned to the selected jack is

shown in the parentheses next to “Current”.

Input rename INPUT RENAME

Use this feature to change the name of the input source (up

to 9 characters) that appears in the OSD and in the front

panel display.

• To locate the position to edit , press 8l / h.

• To select a character, press 8k / n.

• To confirm the setting, press 8ENTER.

• To return to the previous screen without change, press

9RETURN.

Press 8n to change the character in the following order, or

press 8k to go in the reverse order: A to Z, 0 to 9, a to z,

symbols (#, *, –, +, etc.), space.

Volume trim VOL. TRIM

Use this feature to adjust the level of the signal input at

each jack. This feature is useful if you want to balance the

level of each input source to avoid sudden changes in

volume when switching between input sources.

Control range: –6.0 dB to +6.0 dB

Control step: 0.5 dB

Initial setting: 0.0 dB

This parameter also affects the signals output at the audio

ZONE OUT jacks.

Decoder mode DECODER MODE

Use this feature to switch the decoder activation mode.

“DECODER MODE” is available only when the digital audio

input jacks (HDMI, OPTICAL and/or COAXIAL) are assigned

to the selected input source.

Audio input BGV BGV

Use this feature to select the video source played in the

background of the selected audio input source.

Charge on standby STANDBY CHARGE

Use this feature to select whether this unit charges the

battery of the stationed iPod or not when this unit is in the

standby mode.

Start pairing START PAIRING

Use this feature to start pairing the connected Yamaha

Bluetooth wireless audio receiver (such as YBA-10, sold

separately) with your Bluetooth component. For details

about the pairing, refer to “Pairing the Bluetooth™

receiver and your Bluetooth component” (page 65).

1 Press 8ENTER to start pairing.

The connected Bluetooth receiver starts searching

Bluetooth components. “Searching...” appears in the

OSD.

2 Check that the Bluetooth component detects

the Bluetooth receiver.

For details, refer to the instruction manual of the

Bluetooth component.

Choice Functions

AUTO

Automatically detects digital audio signal input

types and selects the appropriate decoder.

DTS

Activates the DTS decoder and plays back only

DTS digital audio signals when digital audio

signals are input.

Note

Choice Functions

BD/HD DVD,

DVD, CBL/

SAT, DVR,

VCR, V-AUX,

DOCK

Selects the corresponding input source as the

background video source.

OFF

Does not play the video source in the

background.

Choice Functions

AUTO

Charges the battery of the stationed iPod when

this unit is turned on and in the standby mode.

OFF

Charges the battery of the stationed iPod only

when this unit is turned on.

To ensure security, a time limit of 8 minutes is set for

the pairing operation. You are recommended to read

and fully understand all the instructions before starting.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 145 146

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha RX-V1900 Bedienungshandbuch Seite 86

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für AV-Receiver Yamaha RX-V1900