Yamaha DRX-730 Bedienungshandbuch PDF herunterladen (Seite 59)

Chapter 10: Initial Settings

53 En

English

■ TV Screen

Sets the aspect ratio of the picture output by the

analog and HDMI video outputs. Choose an option

that matches the aspect ratio of your TV.

• 4:3 (Letter Box) (default): Select if you have a

conventional 4:3 TV. Widescreen movies will be

displayed with black bars top and bottom.

• 4:3 (Pan & Scan): Select if you have a

conventional 4:3 TV. Widescreen movies will be

displayed with the sides trimmed so that the

picture fills the entire screen. Video from discs

that do not support Pan & Scan will be output in

4:3 Letter Box format.

• 16:9 (Wide): Select if you have a widescreen TV.

• 16:9 (Compressed): This option can only be

selected if your TV is connected to the HDMI

jack and the HDMI Resolution setting is set to

1920 x 1080p, 1920 x 1080i, or 1280 x 720p. Select

this if you want to properly display 4:3 content on

a widescreen TV. Black bars will be displayed on

either side of the picture.

■ Component Out

Sets the COMPONENT VIDEO OUT to interlaced or

progressive video output. Progressive scanning offers

better picture quality and reduced picture noise.

If your TV or projector supports progressive

scanning, select Progressive. Refer to your TV

owner’s manual for details.

• Interlace (default): The COMPONENT VIDEO

OUT outputs interlaced video.

• Progressive: The COMPONENT VIDEO OUT

outputs progressive video and the

PROGRESSIVE indicator on the display lights up.

To use progressive video, select the Progressive option

and press ENTER. When the confirmation message

appears on-screen, press ENTER to confirm, or press

RETURN to cancel.

Notes:

•When you switch between Interlace and

Progressive, the picture may be disturbed.

•When the HDMI Resolution is set to 720 x 480i

(NTSC) or 720 x 576i (PAL), the Component Out

setting is forcibly set to Interlace. When another

resolution is selected, the Component Out setting

is forcibly set to Progressive.

•If you select Progressive inadvertently and your

TV doesn’t support it, you may lose the picture

altogether. In this case, connect the DRX-730 to a

TV with a composite video connection and

change the setting back to Interlace, or reset the

DRX-730 (see page 61).

•CONSUMERS SHOULD NOTE THAT NOT

ALL HIGH DEFINITION TELEVISION SETS

ARE FULLY COMPATIBLE WITH THIS

PRODUCT AND MAY CAUSE ARTIFACTS TO

BE DISPLAYED IN THE PICTURE. IN CASE OF

525 PROGRESSIVE SCAN PICTURE

PROBLEMS, IT IS RECOMMENDED THAT

YOU SWITCH THE CONNECTION TO THE

“STANDARD DEFINITION” OUTPUT. IF

THERE ARE QUESTIONS REGARDING YOUR

VIDEO MONITOR COMPATIBILITY WITH

THIS UNIT, PLEASE CONTACT OUR

CUSTOMER SERVICE CENTER.

■ HDMI Resolution

Sets the HDMI output video resolution.

• 1920 x 1080p: Select if your HDMI TV supports

1080p progressive video.

• 1920 x 1080i: Select if your HDMI TV supports

1080i interlace video.

• 1280 x 720p: Select if your HDMI TV supports

720p progressive video.

• 720 x 480p (NTSC), 720 x 576p (PAL) (default):

Select if your HDMI TV supports 480p or 576p

progressive video.

• 720 x 480i (NTSC), 720 x 576i (PAL): Select if

your HDMI TV supports 480i or 576i interlace

video.

To change the res olution, select a resolution, and then

press ENTER. When the confirmation message

appears on-screen, press ENTER to confirm.

Notes:

•When you change the resolution, the picture may

be disturbed and may not appear immediately.

• Resetting the HDMI settings

If no picture is displayed after changing the

resolution, use the procedure below to revert to the

default resolution of 720 x 480p (NTSC), 720 x 576p

(PAL).

1 Set the DRX-730 to standby.

2 While holding down Stop ( ) on the

DRX-730, press STANDBY/ON, keeping

Stop ( ) pressed until “DVD — NO REQ.”

appears on the display.

Video Output settings

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha DRX-730 Bedienungshandbuch Seite 59

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DVD Spieler Yamaha DRX-730