Yamaha AG-Stomp Bedienungshandbuch PDF herunterladen (Seite 10)

Connections

■ Connecting a Mixer or Amplifier

1. Use the supplied TRS-XLR converter cable to convert the AG-Stomp’s outputs (balanced TRS) to bal-

anced XLR outputs.

2. Use a commercially available PA type TRS phone cable, to connect the AG-Stomp’s output jack to the

balanced inputs of a mixer, power amplifier, etc.

3. When a monaural phone cable is used, connections will be unbalanced.

To realize the AG-Stomp’s full potential, we recommend using it in stereo.

To the AG-Stomp’s OUTPUT

L/MONO, R Jacks

TRS-XLR Converter

Cable (supplied)

XLR Cable

PA Type TRS Phone Cable

Monaural Phone Cable

Mixer, Power Amplifier, etc.

Balanced XLR Output

Balanced TRS Output

Unbalanced Output

1: Ground

2: Hot

3: Cold

T: Hot

R: Cold

S: Ground

Power Adaptor

AC-10

Electric

Outlet

OFF (

)

Before making any connections to any of the AG-Stomp’s INPUT and/or OUTPUT jacks,

make sure that the power on the AG-Stomp and all other devices is turned OFF to prevent

electrical shock or damage to the devices.

■ Connecting the Power

Use the supplied power adaptor (AC-10) to operate the AG-Stomp.

1. Make sure the AG-Stomp’s Power Switch (STAND-BY) is in the OFF

position ( ).

2. Connect the power adaptor’s plug to the AC IN jack on the AG-Stomp.

3. Connect the power adaptor to an electric outlet.

Only use the supplied AC-10 power adaptor to power the unit.

The use of any other power adaptor may cause damage, over-

heating or fire, which can be very dangerous.

Make sure you use the proper AC voltage as indicated on the

power adaptor.

Never use the supplied power adaptor AC-10 with any other

device.

* The AC adaptor’s shape will vary

according to the country to which

the device is shipped.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha AG-Stomp Bedienungshandbuch Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gitarren Yamaha AG-Stomp