Yamaha DSP-E580 Bedienungshandbuch PDF herunterladen (Seite 13)

CONNECTING AN INTEGRATED STEREO

AMPLIFIER OR STEREO RECEIVER TO THIS UNIT

Using an Integrated Amplifier or Stereo Receiver with PRE OUT

and MAIN IN Terminals

Some integrated amplifiers and stereo receivers have PRE OUT

and MAIN IN jacks which permit the preamplifier and power amplifier

sections to function independently. If your integrated amplifier or

stereo receiver has these jacks, begin by removing the jumpers that

connect the PRE OUT and MAIN IN jacks (or decouple the

preamplifier and power amplifier using the appropriate switch—refer

to your amplifier or receiver operation manual).

Connect the amplifier’s PRE OUT jacks to this unit’s INPUT jacks

with a stereo pin cable. Make sure that the “L” output from the

amplifier is connected to the “L” input on this unit, and that the “R”

output from the amplifier is connected to the “R” input on this unit.

Connect the MAIN OUTPUT jacks on this unit to the MAIN IN

jacks on your integrated amplifier or receiver with a second stereo pin

cable—making sure to connect the left and right channels correctly.

Connect the MAIN speakers to the speaker output terminals of your

integrated amplifier or receiver.

INPUT

TAPE

OUTPUT

10dB 0dB

MAIN

PRE

OUT

Main Speaker L Main Speaker R

Integrated Amp

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

Keine Kommentare

Yamaha DSP-E580 Bedienungshandbuch Seite 13