Yamaha AW4416 Spezifikationen PDF herunterladen (Seite 18)

AW4416 Version 2.0 Manual Supplement

Version 2.0 Manual Supplement

Operate the sustain pedal connected to

your synthesizer.

A control change #64 (Hold-on) message with a

value of 127 (hexadecimal 7F) will be input in

the [ON] key message area.

In this message, the ﬁrst value in the boxes

extending toward the right (i.e., the ﬁrst byte) is

the MIDI channel, the second is the control num-

ber, and the third byte is the actual value of the

message.

Turn off the LEARN button, and take your

foot off of the sustain pedal.

Tip!

If you take your foot off the sustain pedal before turn-

ing off the LEARN button, a control change #64 with

a value of 0 (hexadecimal 00) will be input in the

MIDI message display area. However even in this

case, the following steps will not be affected.

Move the cursor to the location of the third

byte, and use the [DATA/JOG] dial to

change the value to “SW.”

The byte whose value was set to “SW” will be

transmitted as 127 (hexadecimal 7F) when the

[ON] key is turned on (lit), and as 0 (hexadeci-

mal 00) when the [ON] key is turned off (dark).

Tip!

• It is also possible to input an entire MIDI message

manually in this way. In this case, be sure to specify

“END” at the end of the MIDI message.

• If you want a speciﬁc MIDI message to be transmit-

ted each time you press [ON] (for example if you

have assigned a program change), it is not necessary

to input the “SW” value.

If you input a MIDI message manually, it is possible to

input an inappropriate or invalid message. If such a

MIDI message is transmitted to a connected external

device, the device may malfunction. Please use cau-

tion.

Make sure that the Remote function of the

currently-displayed page is enabled

(ENABLE), and operate the [ON] key to

which the MIDI message was assigned.

When you press the [ON] key, the key LED will

light and a Hold-on message will be transmitted.

When you release the [ON] key, the key LED will

go dark and a Hold-off message will be transmit-

ted.

Tip!

It is also possible to change the operation of the [ON]

key so that the on/off status is switched each time you

press the key. For details refer to the explanation of

the LATCH/UNLATCH button on page 34.

If you want to assign a name to the [ON]

to which the MIDI message was assigned,

move the cursor to the NAME EDIT button

for the [ON] key, and press the [ENTER]

key.

The NAME EDIT popup window will appear.

Use the character palette to input a name,

and move the cursor to the OK button and

press the [ENTER] key.

The name you input will be displayed below the

channel button located in the lower part of the

display.

Tip!

The edited content of the REMOTE screen is saved as

part of the song.

[Reference pages]

Details on the Remote A 1-8/Remote A 9-16/Remote

B 1-8/Remote B 9-16 pages → P.33

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha AW4416 Spezifikationen Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernseher & Monitore Yamaha AW4416