Yamaha DG-1000 Betriebsanleitung PDF herunterladen (Seite 44)

1 Confirm the measurement

result.

When the measurement ends, a beep

sounds and the measurement result

appears on the display.

2 Press V/v repeatedly to select

the item, then press .

3 Press V/v repeatedly to select a

preset number to be used, then

press .

4 Press .

The measurement results are saved.

Tip

The size of a speaker (LARGE/SMALL) is

determined by the low characteristics. The

measurement results may vary, depending on the

position of the optimizer microphone and speakers,

and the shape of the room. It is recommended that

you follow the measurement results. However, you

can change those settings in the Speaker Settings

menu (page 66). Save the measurement results first,

then try to change the settings if you want.

When error codes appear

Try the remedies and re-perform the auto

calibration.

Confirming/saving the

measurement results

Measurement

result

Display Explanation

When the

measurement

process

completes

properly

COMPLETE

Proceed to step

When the

measurement

process fails

ERROR

CODE XX

See “When

error codes

appear” (page

44).

Item Explanation

RETRY Re-performs the auto

calibration.

SAVE EXIT Saves the measurement

results and exits the setting

process.

WRN CHECK Displays a warning

concerning the

measurement results. See

“When you select “WRN

CHECK”” (page 45).

PHASE INFO Displays the phase of each

speaker (in phase/out of

phase). See “When you

select “PHASE INFO””

(page 45).

DIST.INFO Displays the measurement

result for speaker distance.

LEVEL INFO Displays the measurement

result for speaker level.

EXIT Exits the setting process

without saving the

measurement results.

Error code Cause and remedies

CODE 31 SPEAKERS (OFF/A/B/A+B) is

set to OFF. Set it to others and re-

perform the auto calibration.

CODE 32 None of the speakers were

detected. Make sure that the

optimizer microphone is

connected properly and re-

perform the auto calibration.

If the optimizer microphone is

connected properly but the error

code appears, the optimizer

microphone cable may be

damaged or improperly

connected.

CODE 33 (F) None of the front speakers are

connected or only one front

speaker is connected.

The optimizer microphone is not

connected.

Item Explanation

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 122 123

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha DG-1000 Betriebsanleitung Seite 44

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für AV-Receiver Yamaha DG-1000