Yamaha RX-A1030 Bedienungshandbuch PDF herunterladen (Seite 112)

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 112

Multi Zone

Configures the multi zone settings.

■ Main Zone Set

Configures the main zone setting.

❑ Zone Rename

Changes the zone name (for main zone) displayed on the front display or TV screen.

■ Procedure

Press ENTER to enter the name edit screen.

Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.

• To clear the entry, select “CLEAR”.

Use the cursor keys to select “OK” and press ENTER.

• To restore the default setting, select “RESET”.

To exit from the menu, press ON SCREEN.

■ Zone2 Set

Configures the Zone2 settings.

❑ Volume

Enables/disables volume adjustments for Zone2 output.

If you have connected an external amplifier with volume control to the unit, disable

volume adjustments for Zone2.

Settings

• This setting is not available when “Power Amp Assign” (p.103) is set to “7ch +1ZONE.

❑ Max Volume

Sets the Zone2 maximum volume to prevent excessive loudness.

Setting range

-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB

Default

+16.5 dB

• This setting is available only when “Volume” is set to “Variable”.

❑ Initial Volume

Sets the Zone2 initial volume for when the unit is turned on.

Settings

• This setting is available only when “Volume” is set to “Variable”.

Fixed Disables volume adjustments for Zone2 output.

Variable (default) Enables volume adjustments for Zone2 output.

Off (default)

Sets the level at the volume level of the unit when it last entered standby

mode.

Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB

increments).

(This setting works only when the initial volume is set lower than “Max Volume”.)

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 153 154

Keine Kommentare

Yamaha RX-A1030 Bedienungshandbuch Seite 112