Yamaha RX-V365 Handbuch PDF herunterladen (Seite 46)

42 En

Troubleshooting

Sound is heard from

the speaker on one

side only.

Incorrect cable connections. Connect the cables properly. If the problem persists,

the cables may be defective.

11-14

Incorrect settings in “SP LEVEL.” Adjust the “SP LEVEL” settings. 33

Only the center

speaker outputs

substantial sound.

When playing a monaural source with a

CINEMA DSP program, the source signal

is directed to the center channel, and the

front and surround speakers output effect

sounds.

No sound is heard

from the center

speaker.

“CENTER” in “SPEAKER SET” is set to

“NONE.”

Set “CENTER” to “SML” or “LRG.” 32

Some sound field programs do not output

sounds from the center speaker.

Try another sound field program. 25

No sound is heard

from the surround

speakers.

“SUR. LR” in “SPEAKER SET” is set to

“NONE.”

Set “SUR. LR” to “SML” or “LRG.” 32

This unit is in the “STRAIGHT” mode

and a monaural source is being played

back.

Press

STRAIGHT on the front panel so that

“STRAIGHT” disappears from the front panel

display.

No sound is heard

from the subwoofer.

“BASS OUT” in “SPEAKER SET” is set

to “FRNT” when a Dolby Digital or DTS

signal is being played.

Set “BASS OUT” to “SWFR” or “BOTH.” 32

“BASS OUT” in “SPEAKER SET” is set

to “SWFR” or “FRNT” when a 2-channel

source is being played.

Set “BASS OUT” to “BOTH.” 32

The source does not contain low-

frequency bass signals.

Dolby Digital or DTS

sources cannot be

played. (Dolby Digital

or DTS indicator on

the front panel

display does not light

up.)

The connected component is not set to

output Dolby Digital or DTS digital

signals.

Make an appropriate setting following the operating

instructions for your component.

—

Audio input jack select is set to

“ANALOG .”

Set Audio input jack select to “AUTO.” 18

A humming sound is

heard.

Incorrect cable connections. Connect the audio cables firmly. If the problem

persists, the cables may be defective.

—

The volume level

cannot be increased,

or the sound is

distorted.

You are attempting to set the volume level

higher than the maximum volume level.

Adjust “MAX VOL.” setting. 34

The component connected to the AUDIO

OUT (REC) jack on this unit is turned off.

Turn on the power of the component. —

The sound effect

cannot be recorded.

It is not possible to record the sound effect

with a recording component.

A source cannot be

recorded by an

analog component

connected to the

AUDIO OUT (REC)

jack.

The source component is not connected to

the analog AUDIO IN jacks on this unit.

Connect the source component to the analog AUDIO

IN jacks.

Problem Cause Remedy

See

page

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha RX-V365 Handbuch Seite 46

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für AV-Receiver Yamaha RX-V365