Yamaha v4 Handbuch PDF herunterladen (Seite 89)

Channel Job

Reference Manual

CH MOVE MODE window

1 SOURCE CH field

Displays the move-source channel. While this window is displayed, press a [SEL] key on

the top panel to select an input channel. The selected channel will be highlighted in this

field. If you want to re-select the move-source channel, press this field.

2 DESTINATION CH field

Displays the move-destination channel. When you specify the move-source, you can

then select the move-destination input channel by pressing its [SEL] key on the panel.

When the move-destination channel is selected, this field will be highlighted. If you

want to change the move-destination channel, press the [SEL] key for the desired input

channel. If you want to defeat the selected move-destination channel, press the

DESTINATION CH field.

NOTE

In the case of the CL3/CL1, faders that do not exist on those models will not be shown.

3 MOVE button

Executes a move operation. After selecting the move-source channel and move-

destination channel, the channel settings move from the move-source to the move-

destination. The settings of all channels between the move-source and move-

destination will shift toward the move-source by one channel.

4 CLOSE button

Press this button to close the window and return to the previous screen.

1 2

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 323 324

Keine Kommentare

Yamaha v4 Handbuch Seite 89