Yamaha PCS-500 Bedienungshandbuch PDF herunterladen (Seite 41)

40 En

Setup menu

■ User Input (“Cable”, “SAT”, “DVD”, etc.

— the name of an input source you have

added before)

Watch/Listen/Play

You can customize the icons under the activities displayed

on the source screen for each component. For example, if

you listen to a CD using the DVD player frequently, you

can add the “CD” icon under the “Listen” activity and

rename the icon to “CD/DVD-P”.

Selectable icons are as follows:

LiveTV, Movie, DVR, Game, Apple TV, CD, Other,

None (Select “None” when you want to delete the

assigned icon from the selected activity.)

You can rename icons with up to eight characters.

Remote Code

Use this menu to switch the remote control code for the

component. Follow steps 6 to 15 at “Step 3: Source Device

Setup”. (☞ P. 15)

Remote Code Learning

Use this menu to add/change remote control codes. See

below.

Remove

Use this menu to remove any component you have added.

If you change the connections between this unit and source

devices, first remove the input settings, then make new settings

using the “Add new input” menu (☞ P. 3 9 ) .

■ Programming remote control codes from

other remote controls

You can program remote control codes from other remote

controls. Use the learning feature if you want to program

functions not included in the basic operations.

1 Select the source device’s type.

If any remote control code has been set already, skip

this step.

2 Select a button on the remote control or the

virtual remote control.

You can program the functions of other remote

controls to the following buttons.

• GUIDE, MENU, PREV., EXIT, u / d / j / i ,

ENTER, CH u / d, and PAGE u / d on the

remote control.

• Any of the virtual remote control buttons

(including buttons L1 to L14 (☞ P. 22))

3 Select “Learn” and immediately press and

hold the button you want to program on the

remote control until “Code learning was

successful” appears.

If the target button is one of the L1 to L14 buttons,

you can rename the button. Select “Rename” and

rename the button.

If learning was unsuccessful, “Code learning failed”

appears. In this case, place the remote control near

the remote control sensor of this unit and select

“Retry”, or select “Cancel” to cancel the learning

process.

Aim the remote control of other devices at the remote

control sensor of this unit within the range of 10 cm to 2.5 m

(4 in. to 8 ft.).

4 To learn other codes, select “Learn next

code” and repeat steps 1 to 3 until you finish

“learning” all the desired code.

5 Select “Finished” and then “Yes” to exit the

learning process.

• If the other remote control uses infrared rays, this unit can learn

most of its function. However, you may not be able to program

some special signals or extremely long transmissions.

• This unit does not support the control interfaces for game

consoles.

Use this menu to adjust the network parameters.

■ Network Select

Use this menu to select a connection method (wired or

wireless).

Notes

Network menu (YMC-700 only)

Choice Functions

Ethernet

This unit connects to a wired network.

WLAN

This unit connects to a wireless network.

01EN_00_YMC-700_500_U.book Page 40 Wednesday, April 8, 2009 11:46 AM

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha PCS-500 Bedienungshandbuch Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Klaviere Yamaha PCS-500