Yamaha PCS-500 Bedienungshandbuch PDF herunterladen (Seite 42)

41 En

Setup menu

ADVANCED

OPERATION

■ IP Address

Use this menu to change the network parameters (IP

address, etc.) manually.

DHCP (DHCP setting)

Use this feature to select whether to allow this unit to

obtain the network parameters (IP address, subnet mask,

default gateway, primary DNS server and secondary DNS

server) from the DHCP server of the connected network.

IP Address (IP address)

Use this parameter to specify the IP address assigned to

this unit. This value must not be the same as the one used

for other devices in the target network.

Subnet Mask (Subnet mask)

Use this parameter to specify the subnet mask value

assigned to this unit.

Default Gateway (Default gateway)

Use this parameter to specify the IP address of the default

gateway.

DNS Server (P) (Primary DNS server),

DNS Server (S) (Secondary DNS server)

Use this parameter to specify the IP address of the primary

and secondary DNS (Domain Name System) servers.

If you have only one DNS address, enter the DNS address in “DNS

Server (P)”. If you have two or more DNS addresses, enter one of

them in “DNS Server (P)” and another in “DNS Server (S)”.

■ Wireless LAN

When you select this menu item, this unit automatically

begins to search for wireless networks. After searching is

completed, follow the steps below.

1 Select an access point, or select “Manual

Setup” and enter the ESSID (the name of the

wireless network named in the Wi-Fi

settings).

2 Select the security type and input the

security key for the network.

When you select “None” as the security type, you are not

required to input the security key.

3 Select “Yes” to confirm the setting.

■ MAC Address Filter

Use this feature to filter the access to this unit via LAN to

control this unit by the MAC address of the accessing PC.

Control range: 00 to FF for each field (Mac Address Filter:

On, Off)

■ Information

You can display the following network system

information:

• MAC Address assigned to this unit

• IP Address

• Subnet Mask

• Default Gateway

• DNS Server (P)

• DNS Server (S)

• Link Status of the network (No Link/10Base-T/

100Base-TX) and method of communication (Full

Duplex/Half Duplex)

• WLAN Signal Level

• vTuner ID

Use this menu to check and change the account status of

your Rhapsody

account.

■ Account Status

Shows the information regarding the account status.

If “NOT AVAILABLE” appears, check the network

settings.

■ Sign In

Enter your user name (up to 64 characters) and password

(up to 64 characters) provided by the Rhapsody

service,

then select “OK”.

If Sign In fails, an error message appears. In this case, perform

the Sign In procedure again.

■ Rhapsody Free Trial

A free 30-day trial of the Rhapsody

service is available.

When you select this menu, the URL at which the terms of

the trial service can be found appears. If you agree, select

“Yes” to activate the trial account.

■ Remove Account

Select this menu to remove your account.

Choice Descriptions

Select this setting to allow this unit to obtain the

network parameters from the DHCP server of

the connected network.

Off

Select this setting when you want to set the

network parameters manually.

Choice Functions

Mac Address Filter

Turns the MAC address filter function on

or off. When “On” is selected, this unit

accepts PCs whose MAC address is

registered.

MAC Address 1 - 10

The MAC addresses of network devices

which are allowed to connect to this unit.

Rhapsody

Information menu

(YMC-700 only)

Note

01EN_00_YMC-700_500_U.book Page 41 Wednesday, April 8, 2009 11:46 AM

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha PCS-500 Bedienungshandbuch Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Klaviere Yamaha PCS-500