Yamaha EXo8 Bedienungshandbuch PDF herunterladen (Seite 13)

EXi8/EXo8 Owner’s Manual

Alert list

Flashing [SIGNAL]

indicator

(alert number)

Meaning Response

1 The device has not started up correctly.

Turn the power off, then turn on after waiting at least 6 seconds. If this

does not solve the problem, please initialize the memory. Should this

also fails, contact your Yamaha dealer.

The current preset saved in internal

memory has been lost.

Recall the preset. If this does not solve the problem, contact your

Yamaha dealer.

The word clock master has become

unlocked.

Make sure that the word clock signal is being input correctly.

There is a problem with the connection

of the [YDIF IN] connector.

Make sure that YDIF cables are properly connected.

Use cables that meet the required specifications.

Duplicate IP addresses. Change the IP addresses or UNIT ID so that there are no duplicates.

IP address was not set within 60 sec-

onds of startup.

Please check rear panel DIP switch 6 (IP SETTING). If DIP switch 6 is

set to “PC,” use the system’s dedicated application software or the

DHCP server

to specify the dev ice IP address.

Too many devices are connected to the

network.

Reduce the number of devices connected to the network.

The UNIT ID is set to “00.” Set the UNIT ID to something other than “00.”

Devices with identical UNIT IDs were

found connected within the same net-

work.

Change the UNIT ID so that there are no duplicates.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Yamaha EXo8 Bedienungshandbuch Seite 13