Yamaha EXo8 Bedienungshandbuch PDF herunterladen (Seite 7)

EXi8/EXo8 Owner’s Manual

Controls and Connectors

q [INPUT PEAK] indicators 1–8 (EXi8)

These indicators will light red when the input level of the

corresponding INPUT channel is -3 dBFS or higher.

w [INPUT SIGNAL] indicators 1–8 (EXi8)

These indicators will light green when the input level of the

corresponding INPUT channel is -40 dBFS or higher.

When a problem or abnormality occurs in the unit, the indi-

cator that corresponds to the appropriate alert number will

flash in green together with the flashing front panel

[ALERT] indicator.

e [OUTPUT SIGNAL] indicators 1–8 (EXo8)

These indicators will light green when the output level of the

corresponding OUTPUT channel is -40 dBFS or higher.

When a problem or abnormality occurs in the unit, the indi-

cator that corresponds to the appropriate alert number will

flash in green together with the flashing front panel

[ALERT] indicator.

r [ALERT] indicator

When a problem or abnormality occurs in the unit, this indi-

cator will flash in red and at the same time the [INPUT SIG-

NAL] or [OUTPUT SIGNAL] indicator that corresponds to

the alert number will flash in green. For explanations of the

alerts, refer to the “Alert list” on page 13.

t [POWER] indicator

This indicator will light when this device is powered-on.

y [NETWORK] indicator

This indicator will light green if a link is established with an

external device via the rear panel NETWORK connector

(page 9). It will flash while data is being sent or received.

u [YDIF] indicator

This indicator will light green if the rear panel [YDIF IN]

connector (page 9) is correctly connected to the [YDIF

OUT] connector of another device.

i Power switch

This is the power switch. The power is on if the switch is in

the position. The power is off if the switch is in the

position.

Front Panel

r t iyq w

r t iy u

EXi8

EXo8

Alert number

Example: When a problem related to alert number “3” occurs

NOTE

• Do not cycle the power switch in rapid succession. Wait at

least 6 seconds before turning the power switch on after it

has been turned off. Failing to observe this precaution

may cause malfunctions.

•Even when the power switch is turned off, a small amount

of current is flowing through the unit. If you plan not to use

the unit for a long period of time, remove the power cable

from the AC outlet.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha EXo8 Bedienungshandbuch Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zusätzliche Musikausrüstung Yamaha EXo8