Yamaha RX-A3060 Bedienungshandbuch PDF herunterladen (Seite 20)

En 20

1 Connecting speakers

The unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to 2 subwoofers to create the favorite acoustic space in your room.

You can also apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance your system (p.30).

Ideal speaker layout Functions of each speaker

• Use “Ideal speaker layout” (diagram on the left) as reference. You do not need to exactly adjust the speaker

layout to this diagram since the YPAO function of the unit will automatically optimize the speaker settings (such

as distances) to suit the speaker layout.

• When using only one surround back speaker, place it straight behind the listening position (middle of “SBL”

and “SBR” in the diagram).

• The unit creates front Virtual Presence Speaker (VPS) using the front, center, and surround speakers to produce

3-dimensional sound fields even when no front presence speakers are connected. However, we recommend

using front presence speakers in order to experience the full effect of the sound fields (and rear presence

speakers for further spatial sounds).

• (RX-A3060 only)

The unit creates rear Virtual Presence Speaker (VPS) using the front, center, and surround speakers to produce

natural 3-dimensional sound fields when front presence speakers are connected but no rear presence speakers.

Caution

Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers.

For details, see “Setting the speaker impedance” (p.27).

T Y

0.3 m (1 ft) or more

1.8 m

(5.9 ft)

0.5 to 1 m

(1.6 to 3.3 ft)

1.8 m

(5.9 ft)

0.5 to 1 m

(1.6 to 3.3 ft)

10°~30°10°~30°

1.8 m

(5.9 ft)

1.8 m

(5.9 ft)

Speaker type Function

Front (L/R)

Produce front left/right channel sounds (stereo sounds).

Center 3 Produces center channel sounds (such as movie dialogues and vocals).

Surround (L/R)

Produce surround left/right channel sounds. Surround speakers also produce

surround back channel sounds when no surround back speakers are connected.

Surround back (L/R)

Produce surround back left/right channel sounds.

Front presence (L/R)

Produce CINEMA DSP effect sounds or heights channel sounds of Dolby Atmos

and DTS:X contents.

Rear presence (L/R)

Produce CINEMA DSP effect sounds or heights channel sounds of Dolby Atmos

and DTS:X contents.

Subwoofer 9

Produces LFE (low-frequency effect) channel sounds and reinforces bass parts of

other channels.

This channel is counted as “0.1”. You can connect 2 subwoofers to the unit and

place them on the left/right (or front/rear) sides of the room.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 198 199

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha RX-A3060 Bedienungshandbuch Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für AV-Receiver Yamaha RX-A3060