Yamaha RX-A3060 Bedienungshandbuch PDF herunterladen (Seite 64)

En 64

Warning messages

If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions.

However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.

Warning message Cause Remedy

W-1: Out of Phase A speaker cable may be connected with the reverse polarity (+/-).

Select “Wiring” in “Result” (p.62) and check the cable connections (+/-) of the speaker identified by “Reverse”.

If the speaker is connected incorrectly:

Turn off the unit and then reconnect the speaker cable.

If the speaker is connected correctly:

Depending on the type of speakers or room environment, this message may appear even if the speakers are

connected correctly. In this case, you can ignore the message.

W-2: Over Distance

A speaker is placed more than 24 m (80 ft) from the listening

position.

Select “Distance” in “Result” (p.62) and move the speaker identified by “>24.00m (>80.0ft)” within 24 m (80 ft) of the

listening position.

W-3: Level Error There are significant volume differences between the speakers.

Select “Level” in “Result” (p.62) and check the speaker identified by “Over ±10.0dB”, then check the usage

environment and cable connections (+/-) of each speaker, and the volume of the subwoofer. We recommend using

the same speakers or speakers with specifications that are as similar as possible.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 198 199

Keine Kommentare

Yamaha RX-A3060 Bedienungshandbuch Seite 64