Yamaha RX-V1 Handbuch PDF herunterladen (Seite 11)

English

( REC OUT/ZONE2

Selects the source you want to direct to the audio/video

recorder and ZONE 2 outputs independent of the source you

are listening to in the main room. When set to the SOURCE/

REMOTE position, the input source is directed to all outputs.

· VIDEO AUX

Inputs audio and video signals from a portable external source

such as a video camera. To reproduce source signals from these

jacks, select V-AUX as the input source. To direct this source

to the VCR 1 output jacks, select VIDEO AUX using REC

OUT/ZONE 2.

) PRESET/TUNING (EDIT)

Switches the function of PRESET/TUNING / (the colon

“:” turns on or off).

This button is also used to exchange the places of two preset

stations with each other.

‚ FM/AM

Switches the reception band between FM and AM.

_ MEMORY (MAN’L/AUTO FM)

Enters a station into memory. See “Manually presetting

stations” on page 36 for details. Hold down this button for more

than three seconds to start automatic preset tuning. See

“Automatically presetting stations” on page 37 for details.

— TUNING MODE (AUTO/MAN’L MONO)

Switches the tuning mode between automatic and manual. To

select the automatic tuning mode, press this button so that the

AUTO TUNING indicator appears in the front panel display

(the STEREO indicator also appears if receiving a stereo

broadcast). To select the manual tuning mode, press this button

so that the AUTO TUNING indicator does not appear.

Controls and Functions

ﬁ EFFECT

Switches the effect speakers (Center, Front Effect, Rear and

Rear Center) on and off. If you turn off the output of these

speakers using EFFECT, all DTS and Dolby Digital audio

signals are directed to the Main left and right channels except

for the LFE channel.

When DTS or Dolby Digital signals are mixed, the left and

right Main channel signal levels may not match.

^ 6CH INPUT

Switches between 6CH INPUT mode and normal input

modes. 6CH INPUT mode takes priority over the source

selected with INPUT SELECTOR.

You cannot use DSP sound field programs while using an

external decoder.

ﬂ BALANCE

Controls the balance of the sound levels coming from the

right and left Main speaker(s). Setting this control to the

center position “0” is appropriate for most situations.

& A/B/C/D/E

Selects one of the five preset station groups.

‡ BASS EXTENSION ON/OFF

When pushed in (ON), this feature boosts the bass frequency

of the left and right main channels by +6 dB (60 Hz) while

maintaining overall tonal balance. This boost is useful if you

do not use a subwoofer.

However, this boost may not be noticeable if the main

speakers are set to “SMALL” and the bass output mode is set

to “SW.”

* PROCESSOR DIRECT ON/OFF

When pushed in (ON), BASS, TREBLE, BALANCE, and

BASS EXTENSION are bypassed, eliminating any

alteration of the original signal.

° PRESET/TUNING /

Selects preset stations when the colon “:” appears next to the

band indication in the display, and selects the tuning

frequency when the colon “:” does not appear.

Opening and Closing the Front Panel Door

When you are not operating the controls behind the front panel door, close the door.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 94 95

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha RX-V1 Handbuch Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für AV-Receiver Yamaha RX-V1