Yamaha RX-V1 Handbuch PDF herunterladen (Seite 27)

English

Connecting External Amplifiers

If you want to increase the power output to the speakers, or want to use another amplifier, connect an external amplifier to the PRE OUT/

MAIN IN terminals as follows.

~ MAIN jacks

MAIN OUT jack ....... Main channel line output jacks.

The signals output through these jacks

are affected by BASS, TREBLE,

BALANCE, and BASS EXTENSION

settings.

MAIN IN jacks .......... Line input to the RX-V1 Main channel

amplifiers.

Ÿ CENTER jacks

CENTER OUT jack . Center channel line output jacks.

CENTER IN jack ..... Line input to the RX-V1 Center channel

amplifier.

! REAR CT jack

Rear Center channel line output jack.

⁄ SUBWOOFER jacks

Subwoofers reinforce very low frequencies.

MONO ....................Main, Center and Rear channel

frequencies below 90 Hz are output

through this jack. You can also direct

DTS and Dolby Digital LFE signals to

this output.

SPLIT .....................The SPLIT jacks output stereo separation

for the Main and Rear channels and a

split mono signal for the Center and LFE

channels.

Adjust the volume level of the subwoofer with the control on

the subwoofer. Subwoofer volume cannot be adjusted from this

unit. Depending on the settings in SET MENU items

1. SPEAKER SET, 3A. LFE LEVEL and 4A. LFE LEVEL,

some signals may not be output from the SUBWOOFER jacks.

@ FRONT

Front Effect channel line output jacks.

¤ REAR (SURROUND)

Rear channel line output jacks.

PREOUT/MAIN IN

FRONT

REAR

(SURROUND)

SUB

WOOFER

SPLIT

CENTER

OUT

MAIN

OUT

MONO

REAR CTR

Hookups

Note:

• When RCA pin plugs are connected to the PRE OUT/MAIN IN output jacks for output to external amplifiers, the corresponding internal amplifiers will be

muted.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 94 95

Kommentare zu diesen Handbüchern

Keine Kommentare

Yamaha RX-V1 Handbuch Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für AV-Receiver Yamaha RX-V1