Yamaha P-100 Bedienungshandbuch PDF herunterladen (Seite 45)

Bulk protect

The bulk protect function protects the P-100’s internal settings against incoming system exclusive messages.

When this function is turned on, as is normally the case, the P-100 will not accept any incoming bulk dump or param-

eter change messages. When it is set to bulk (“bul”), the P-100 will accept parameter change messages, but protect

against bulk messages. Finally, when turned off, the P-100 will allow its memory to be overwritten by incoming bulk

dumps and system exclusive messages.

Enter MIDI Utility mode.

Press the [PROTECT] button while holding down the [MIDI]

button. The current bulk protect setting will appear in the

display.

Set the desired value.

Use the [DATA ENTRY] slider or the [-l] and [+l] buttons to

switch the setting to the desired value.

Exit MIDI Utility mode.

Press the [MIDI] button to exit MIDI Utility mode.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 68 69

Keine Kommentare

Yamaha P-100 Bedienungshandbuch Seite 45