Yamaha P-100 Bedienungshandbuch PDF herunterladen (Seite 46)

Pitch bend range

This setting lets you specify how far the pitch of sounds produced by the P-100 will bend when you roll the [PITCH]

wheel all the way in either direction. The range you set here applies only to the P-100’s internal voices. External tone

generators may interpret pitch bend messages from the P-100 in a different manner, depending on their own internal

settings.

Enter MIDI Utility mode.

Press the [PB] button while holding down the [MIDI] button.

The current pitch bend range setting will appear in the display.

Set the desired value.

Use the [DATA ENTRY] slider or the [-l] and [+l] buttons to

select the desired value.

You can set a value from 0 to 12 for the pitch bend range.

The number you select is the number of semitones by which the

[PITCH] wheel will raise or lower the pitch of a note when it is

rolled all the way up or all the way down. Setting a range of 0

will effectively disable the [PITCH] wheel, while a value of 12

will enable the wheel to bend notes up or down an entire octave.

Exit MIDI Utility mode.

Press the [MIDI] button to exit MIDI Utility mode.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 68 69

Keine Kommentare

Yamaha P-100 Bedienungshandbuch Seite 46